| Problem Document
|
Synopsis
|
Last Modified Date
|
| 1916321.1 |
SunFire[TM] V1280, E2900 and Netra[TM] 1280, 1290 System Hang Occur And OS Disk Failed |
2017-10-11
|
| 1591230.1 |
Diagnosing iostat Hard Errors on SPARC Servers DVD ROM |
2018-02-15
|
| 1583559.1 |
Sun Fire [TM] V1280/E2900, Netra 1280/1290 system: unable to boot due to "ERROR: Fast Data Access MMU Miss" and/or "Fatal SCSI error at script address 148 Illegal instruction" |
2017-10-11
|
| 1580204.1 |
Sun Fire [TM] V1280/E2900, Netra 1280/1290: ATAPI timeout messages at boot |
2017-10-18
|
| 1531443.1 |
All memory DIMMS have disabled status in prtdiag output |
2017-10-18
|
| 1524340.1 |
73GB, 146GB, and 300GB Firmware Upgrade to Prevent Disk Drive Failures in SPARC platforms. |
2018-05-09
|
| 1517892.1 |
Sun Fire[TM] V1280, E2900, Netra[TM] 1280, and 1290 Servers: IB_SSC fails POST and stuck in a Boot loop |
2017-10-11
|
| 1516187.1 |
"Eject" button does not work on internal DAT72 drive. |
2018-02-16
|
| 1456194.1 |
Sun Fire [TM] V1280/E2900, Netra 1280/1290 ( LW8/Amazon/Everglades ): net1 Onboard Interface fails on boot net1 and test net1 of interface |
2017-10-18
|
| 1453917.1 |
Sun Fire v1280/E2900 or Netra 1280/1290: lom>console command may return that Solaris is not active when Solaris is actually running |
2014-09-22
|
| 1399165.1 |
Sun Fire [TM] V1280/E2900, Netra 1280/1290: Troubleshooting LOM can't boot - PANIC No ID info + busyWait() timeout + MAC address 0:0:0:0:0:0 |
2017-11-14
|
| 1269395.1 |
Sun Fire[TM] V1280, E2900, Netra[TM] 1280, and 1290 Servers: IB_SSC fails POST after "Not enough memory" message |
2016-07-01
|
| 1269016.1 |
Sun Fire V1280, E2900 and Netra 1280, 1290: DC-DC convertor voltage failure. Voltage ramp timed out after 500 msec. |
2017-10-18
|
| 1019667.1 |
Sun Fire[TM] Server System Board (SB) voltage errors. |
2017-10-18
|
| 1018948.1 |
Sun Fire[TM] Serengeti: System Board power on generates "JTAG part 0x91a0: Substituting version 0x3 for version 0x4" |
2017-02-02
|
| 1018878.1 |
Sun Fire[TM] v1280, E2900, 3800, 4800, 4810, E4900, 6800, E6900 and Netra 1280, 1290: Error Buffer on SCs needs to be reset in the event of errors - The error buffer is full |
2017-03-29
|
| 1018832.1 |
Sun Fire [TM] SF3800/SF4800/SF4810/SF6800 - E4900/E6900 Server ( Serengeti/Amazon ): POST fails during IOPOST, marking all I/O Boards (IBs) as bad. |
2017-02-02
|
| 1018620.1 |
Sun Fire [TM] Midrange Server: inaccurate msg from the SC following a reboot |
2017-02-02
|
| 1018148.1 |
Sun Fire[TM] Server: Problems Installing a DAT Drive in a V1280, Netra[TM] 1280 or E2900 |
2017-10-18
|
| 1017987.1 |
Response to error: SepromSegment(constructor): PE at 0x----: Invalid CRC observed=xxxxxxxx expected=yyyyyyyy |
2017-02-02
|
| 1017844.1 |
Sun[TM] Fire 3800/4800/4810/6800/E2900/E4900/E6900/V1280 and Netra[TM] 1280/1290 Server: I/O Board (IB) power supply failures. |
2017-02-02
|
| 1017580.1 |
Using "cfgadm -c configure" and diag-level=mem2 may fail on Sun Fire[TM] V1280 and Netra[TM] 1280 |
2017-02-02
|
| 1012816.1 |
Sun Fire[TM] V1280, E2900, Netra 1280 and Netra 1290: When an ssh client hard disconnects, subsequent ssh connections to the system controller fail |
2017-02-02
|
| 1012604.1 |
Sun Fire[TM] E2900/V1280: mpt driver fails to attach to PCI-X Dual Ultra-320 SCSI HBA (Jasper320) |
2017-02-02
|
| 1012439.1 |
DR diag-level is not synced with domain boot parameters diag-level |
2017-10-18
|
| 1012344.1 |
PRTDIAG output incorrect after reseating power supplies. |
2017-02-23
|
| 1012107.1 |
Sun Fire[TM] V1280/Netra[TM] 1280: "I2c error:Slave did not ACK" Message |
2017-02-02
|
| 1011115.1 |
No network or block devices available after PCI+ Upgrade on a Sun Fire[TM] V1280 or E2900 |
2016-07-01
|
| 1011054.1 |
Sun Fire[TM] v1280, E2900, 3800, 4800, 4810, 6800, E4900, E6900, and Netra 1280, 1290 Server: Missing/Improper Seeprom CPU Speed information. |
2017-02-02
|
| 1010922.1 |
New US IV board were just added and the OS will not see them properly |
2017-02-02
|
| 1010901.1 |
Installation of Solaris[TM] 9 04/04 or Solaris[TM] 10 causes domain to panic or ERROR Fast Data Access MMU Miss |
2017-02-02
|
| 1010536.1 |
Sun Fire[TM] V1280, E2900, Netra[TM] 1280, and 1290 Servers: Programming LOM Failed with Error: Resource Temporarily Unavailable |
2017-10-18
|
| 1009954.1 |
Sun Fire[TM] Midrange Server: Time Jumps When SC Accumulates Extended Uptime |
2017-02-02
|
| 1009696.1 |
"kstat -p" and "prtdiag -v" may give seemingly different PCI bus speeds for Dual Fast Ethernet and Dual SCSI PCI Adapters |
2017-03-29
|
| 1009648.1 |
Sun[TM] Fire 3800/4800/4810/6800/E2900/E4900/E6900/V1280 and Netra[TM] 1280/1290 Server: SepromContainer.writeOut: sun.serengeti.I2cException: verify error |
2017-02-02
|
| 1009467.1 |
How to clear faults in FMA after component replacement on Sun Fire[TM] servers. |
2017-02-02
|
| 1009358.1 |
Pending "disabled" status being reported by "showcomponent" command |
2017-02-02
|
| 1009332.1 |
Sun Fire[TM] 3800, v1280, E2900, 4800, 4810, E4900, 6800 and E6900 and Netra 1280, 1290: Certain Memory Configurations with 5.19.0 and 5.19.1 May panic on boot with init level POST |
2017-02-02
|
| 1009178.1 |
Sun Fire[TM] 6800 domain's Notice messages: "platmod: [ID 349959 kern.info] NOTICE: enque_ecc_mailbox_msg: sbbc_mbox_queue_ecc_event not found" |
2017-02-02
|
| 1009008.1 |
Sun Fire[TM] 3800, 4800, 4810, 6800, E4900, E6900, V1280, E2900, Netra 1280, or 1290 server: NCPQ_TO workarounds |
2017-02-02
|
| 1008719.1 |
Resolving Hard Hang Problems on Sun Ultra Servers |
2016-04-15
|
| 1008672.1 |
Sun Fire[TM] (3800-6800/E2900-E6900/v1280) Server: System Controller Setdate to Daylight Savings Time |
2017-10-18
|
| 1008035.1 |
Sun Fire[TM] v1280 and E2900: Prtdiag failed! General system failure |
2017-10-11
|
| 1007996.1 |
picld error after upgrading PCI IB_SCC IO Assembly to PCI+ IO Assembly |
2017-02-02
|
| 1007989.1 |
prtfru -x shows errors on V1280 |
2017-02-02
|
| 1006864.1 |
Sun Fire[TM] Mid Range and High end servers: Dynamic Reconfiguration for Uniboard removal may cause Lotus Domino server instance(s) to abnormally stop |
2017-02-02
|
| 1006676.1 |
Sun Fire[TM] V1280, E2900, or Netra 1280, 1290: a Solaris[TM] shutdown followed by a lom poweroff and poweron sequence can cause an unplanned SC reset. |
2017-10-18
|
| 1006508.1 |
Sun Fire[TM] V1280/E2900/3800/48x0/E4900/6800/E6900: Prtdiag and showboard display wrong cpu speed. |
2017-02-02
|
| 1006156.1 |
"ERROR: Can't open boot device" booting CDROM or disk with Sun[TM] Dual FastEthernet / Dual SCSI PCI Card |
2017-02-02
|
| 1005071.1 |
Sun Fire[TM] Servers (3800/4800/4810/6800/E4900/E6900): I2C communication problem |
2017-02-02
|
| 1005021.1 |
Sun Fire[TM] V1280/E2900/Netra[TM] 1280/1290 Server: Incorrect Firmware Upgrade Procedure Can Lead to Incompatible Firmware on System Boards |
2017-10-11
|
| 1005013.1 |
probe-scsi-all may fail without reset-all on all Sun[TM] Systems |
2017-03-29
|
| 1004868.1 |
SunFire[TM] V1280, E2900 and Netra[TM] 1280, 1290: Lights Out Management (LOM) packages are missing |
2017-02-02
|
| 1004771.1 |
Sun Fire[TM] V1280/Netra 1280: prtdiag command fails for non-root user with error message:" picl_initialize failed: General system failure" |
2017-02-02
|
| 1004679.1 |
Sun Fire[TM] Servers: setdefaults does not reset local-mac-address? parameter |
2017-10-18
|
| 1004364.1 |
Sun Fire[TM] Midrange Server: Safari Port Error may be caused by a resetting SC |
2017-02-02
|
| 1004227.1 |
E2900/V1280 systems that have the PCI+ IB_SSC IO Assembly will not be able to install or boot from Solaris [TM] 9 Operating System 9/05 DVD or CD |
2017-02-02
|
| 1003661.1 |
How to recover when a Sun Fire[TM]E2900, V1280 or Netra[TM] 1280 has an incompatible RTOS and ScApp |
2017-10-11
|
| 1003628.1 |
Sun Fire[TM] V1280 Server: prtdiag -v output loses power supply input details after hotplug |
2017-02-02
|
| 1003118.1 |
Autonegotiation does not work between Sun[TM] Gigabit Ethernet (GBE) cards and Cisco 4003 fiber linecards |
2017-07-11
|
| 1002596.1 |
Sun Fire[TM] V1280 - "prtdiag" might not show environmental output for a new System Board |
2017-02-02
|
| 1002417.1 |
Missing drv/clone forceload in /etc/system on a system with Emulex cards may cause panic during boot |
2017-02-02
|
