Problem Document
|
Synopsis
|
Last Modified Date
|
2304788.1 |
Sefos Restart on NEM |
2017-09-06
|
2189960.1 |
Firmware upgrade with existing faults from prior ILOM rev 3.2.6 to after results in misclassified Subsystem on T4-x, T5-x, & T7-x |
2018-01-12
|
2184172.1 |
Stuck locate button on SB6000 FIM (Front Interface Module) may render ILOM SP to enter preboot menu |
2017-12-21
|
2108364.1 |
T5-1B After Blade Service Processor replacement cannot configure network settings to enable new firmware to be flashed |
2017-10-05
|
1968438.1 |
"start: Target /CH/BLx/SP/cli cannot be started" on Blades with ILOM 3.2.x and CMM with ILOM 3.1.x |
2017-05-26
|
1938327.1 |
Installing Solaris Via Install Server or Jumpstart Server Over VLAN Fails With "Connection timed out" |
2018-03-06
|
1926687.1 |
Sun Blade with Windows 2012 installed is unable to establish a connection to the switch with 8Gb/sec PCI Express Dual FC / Dual Gigabit Ethernet HBA |
2014-09-17
|
1923776.1 |
Oracle Critical Thread (CT) Optimizations in SPARC Sun4v Based Servers to Enhance Single-Threaded Performance |
2017-12-04
|
1922836.1 |
SL500 FC Autochanger and Tape Drives Not Present or Seen After FC HBA Replacement |
2018-03-07
|
1912544.1 |
After T4-1B motherboard replacement start /SYS fails with "The blade is powered off. Power on the blade before attempting a connection. " and cannot logon via single sign-on or network |
2017-10-05
|
1672818.1 |
Troubleshooting "Fatal error has occured in: PCIe fabric" panics on TX-X servers |
2017-10-04
|
1619726.1 |
New T4-1B Blades Are Not Communicating With SB6000 Chassis. |
2017-10-11
|
1613667.1 |
ILOM 3.2 NO LONGER sends the ILOM hostname to DHCP server on SPARC T3-x, SPARC T4-x, and SPARC T5-x servers |
2017-11-14
|
1613206.1 |
SPARC T5-X at System Firmware 9.1.1 Downgrade or Re-flash firmware using BUI method may fail. |
2017-05-09
|
1603333.1 |
Identify cause of PCIEX-8000-0A PCIe event |
2017-10-05
|
1596055.1 |
Sun Blade 6000 System: FC HBA or PCI card not detected - power off |
2018-03-07
|
1594669.1 |
Minimum Solaris version for Oracle VM for SPARC 3.1 on SPARC T5 |
2017-10-05
|
1587809.1 |
Resolving SB 6000 AC Input Power Issue - PS0 (Power Supply 0), PS1 (Power Supply 1) Are Faulty |
2018-01-22
|
1586616.1 |
Solaris 10 T4/T5 server with KU 147440-04 or later can hang or have performance issue with DISM |
2017-09-23
|
1581135.1 |
Oracle VM guest bind failure due to Direct I/O device in an Unknown (UNK) state. |
2017-10-05
|
1580033.1 |
SP Resets on T5xx0, T3, T4, T5 and M5 Systems May Overwrite a User-Land Solaris Memory Page Causing In-Memory Corruption |
2018-01-22
|
1578024.1 |
ereport.io.usb.epse USB endpoint stall event |
2017-10-05
|
1568256.1 |
Error messages of a failed Fibrechannel Host Bus Adaptor, identify a reason for SUN4-8000-5A fault |
2018-03-07
|
1567072.1 |
Workaround Options for Guest Domains Running Solaris 11.1.7.5.0 (or greater) on T5 and M5 Systems and Live Migration |
2016-09-08
|
1534629.1 |
Sun Blade X6275 node denied power up due to "Exceeds blade max power of 510 watts" error. |
2014-11-18
|
1490545.1 |
SM BIOS Uncorrectable CPU-complex Error in ILOM SEL and system hard hangs when running sosreport or commands such as lspci |
2016-07-18
|
1357582.1 |
X6270 - Blade module showing fan fault |
2018-01-25
|
1338066.1 |
Can't login to ILOM/CMM Web GUI or CLI |
2016-06-20
|
1325578.1 |
Sun x64 Servers: How to change Solaris O/S console login to output through ILOM's start /SP/console |
2013-02-05
|
1314501.1 |
T6320 Blade not able to see 10Gb Hydra NEM+ port when having wrong release of SP |
2017-12-04
|
1296521.1 |
Blade cannot be powered on after ILOM/BIOS upgrade, LSI firmware upgrade would fix this |
2018-05-15
|
1002778.1 |
Sun StorageTek [TM] Common Array Manager (CAM) Reports a "Fault Management Service authentication communication error" |
2018-04-30
|