| Problem Document
|
Synopsis
|
Last Modified Date
|
| 2304788.1 |
Sefos Restart on NEM |
2017-09-06
|
| 2184172.1 |
Stuck locate button on SB6000 FIM (Front Interface Module) may render ILOM SP to enter preboot menu |
2017-12-21
|
| 2108364.1 |
T5-1B After Blade Service Processor replacement cannot configure network settings to enable new firmware to be flashed |
2017-10-05
|
| 1926687.1 |
Sun Blade with Windows 2012 installed is unable to establish a connection to the switch with 8Gb/sec PCI Express Dual FC / Dual Gigabit Ethernet HBA |
2014-09-17
|
| 1922836.1 |
SL500 FC Autochanger and Tape Drives Not Present or Seen After FC HBA Replacement |
2018-03-07
|
| 1912544.1 |
After T4-1B motherboard replacement start /SYS fails with "The blade is powered off. Power on the blade before attempting a connection. " and cannot logon via single sign-on or network |
2017-10-05
|
| 1643004.1 |
Message: "Option ROM space exhausted" in the system event logs |
2014-05-29
|
| 1619726.1 |
New T4-1B Blades Are Not Communicating With SB6000 Chassis. |
2017-10-11
|
| 1608270.1 |
"Upgrade failed: the config matching this version cannot be restored" during ILOM FW upgrade on x86 Platform |
2014-03-04
|
| 1596055.1 |
Sun Blade 6000 System: FC HBA or PCI card not detected - power off |
2018-03-07
|
| 1587809.1 |
Resolving SB 6000 AC Input Power Issue - PS0 (Power Supply 0), PS1 (Power Supply 1) Are Faulty |
2018-01-22
|
| 1570851.1 |
Ops Center Tool sent alert - critical alert on faulty component sensor number = 0x00. A generic system component error due to C: boot completed. |
2018-02-04
|
| 1568547.1 |
Blade ILOM cli Console Not Responding |
2017-06-06
|
| 1568256.1 |
Error messages of a failed Fibrechannel Host Bus Adaptor, identify a reason for SUN4-8000-5A fault |
2018-03-07
|
| 1534629.1 |
Sun Blade X6275 node denied power up due to "Exceeds blade max power of 510 watts" error. |
2014-11-18
|
| 1490545.1 |
SM BIOS Uncorrectable CPU-complex Error in ILOM SEL and system hard hangs when running sosreport or commands such as lspci |
2016-07-18
|
| 1357582.1 |
X6270 - Blade module showing fan fault |
2018-01-25
|
| 1338066.1 |
Can't login to ILOM/CMM Web GUI or CLI |
2016-06-20
|
| 1325578.1 |
Sun x64 Servers: How to change Solaris O/S console login to output through ILOM's start /SP/console |
2013-02-05
|
| 1314501.1 |
T6320 Blade not able to see 10Gb Hydra NEM+ port when having wrong release of SP |
2017-12-04
|
| 1304922.1 |
SB replacement can lead to to a serial number of '00000000' on certain Sun x86 Intel based Servers |
2016-11-16
|
| 1296521.1 |
Blade cannot be powered on after ILOM/BIOS upgrade, LSI firmware upgrade would fix this |
2018-05-15
|
| 1021121.1 |
The error "BIOS corruption detected" may be caused by a faulty CPU on the Sun Blade[TM] x6250 server |
2016-11-14
|
| 1002778.1 |
Sun StorageTek [TM] Common Array Manager (CAM) Reports a "Fault Management Service authentication communication error" |
2018-04-30
|
