| Problem Document
|
Synopsis
|
Last Modified Date
|
| 2148348.1 |
WARNING: fctl: ULP FCSM version mismatch; please upgrade FCSM |
2016-06-13
|
| 1981021.1 |
SC.BAT.V_BAT error during boot |
2017-04-05
|
| 1924145.1 |
Scsi Error Sense Key: Not Ready ASC: 0x4 (), ASCQ: 0x3 - Reported by EMC Disk Storage Array |
2018-03-07
|
| 1910445.1 |
SCSI Backplane temperature errors |
2017-04-05
|
| 1900956.1 |
V440: NOTICE: Keyswitch Change Event - State = UNKNOWN |
2018-02-15
|
| 1606409.1 |
No Output From XVR-100 Frame Buffer with Ultra3 SCSI HBA on the same pci bus after OBP upgrade |
2018-02-15
|
| 1596395.1 |
Sun Fire[TM] V440 Server Power Supply failure and "TEMP_SENSOR @ ... T_CORE has exceeded high warning threshold." warning messages, possibly followed by system outage |
2017-12-12
|
| 1591230.1 |
Diagnosing iostat Hard Errors on SPARC Servers DVD ROM |
2018-02-15
|
| 1531204.1 |
Sun Fire [TM] V440 with older ALOM firmware and intermittent power issues may cause false Power Supply failures |
2018-02-15
|
| 1523406.1 |
Server can't boot with LSI RAID Controller error messages on a Sun Fire V440/V445 and Netra 440 |
2018-02-15
|
| 1508651.1 |
'VOLTAGE_SENSOR @ MB.BAT.V_BAT has exceeded low warning threshold' in Sun Fire V440 & Sun Netra 440 Servers |
2018-02-15
|
| 1504359.1 |
Sun Fire V440, Netra 440, V445 Service LED ON when no HW faults are present |
2018-02-15
|
| 1456283.1 |
ALOM console command hangs |
2018-02-15
|
| 1369718.1 |
MB/SC Failure on Sun Fire V240/V440 |
2017-04-05
|
| 1018244.1 |
"config_change_state: Error 0:" error when setting up hardware raid on a Sun Fire [TM] V440 |
2018-02-15
|
| 1013006.1 |
SunFire[TM] V440 Server: Cable Management Assembly 370-4427-06 interferes with PCI card in PCI slot 0 having external interfaces |
2018-02-15
|
| 1012440.1 |
Sun Fire[TM] V440 server: SCSI errors ASC: 0x29 ASCQ: 0x3 |
2018-02-15
|
| 1010518.1 |
Sun Fire[TM] V440 Server: Target ID Error Message when Using raidctl to Mirror Disk |
2017-05-22
|
| 1005154.1 |
Sun Fire[TM] V440: SC Alert: SCC has been removed |
2018-02-15
|
| 1005013.1 |
probe-scsi-all may fail without reset-all on all Sun[TM] Systems |
2017-03-29
|
| 1003733.1 |
Sun Fire[TM] V440 server: Not All The Internal Disks Show Up. |
2018-02-15
|
| 1003602.1 |
ALOM showfru command shows some 2GB DDR DIMM's as 8MB. |
2018-02-15
|
| 1003595.1 |
Sun Fire[TM] V440: ALOM commands and users failing after motherboard replacement |
2018-02-15
|
| 1002099.1 |
Sun Fire[TM] V440: Unable to create a 2nd RAID1 volume |
2018-02-15
|
