| Problem Document
|
Synopsis
|
Last Modified Date
|
| 2199138.1 |
Fails to boot with message Error: I2C transfer failed |
2017-11-30
|
| 2078378.1 |
System outage due to SCC card removal. SCC has been removed.. |
2017-11-30
|
| 1508651.1 |
'VOLTAGE_SENSOR @ MB.BAT.V_BAT has exceeded low warning threshold' in Sun Fire V440 & Sun Netra 440 Servers |
2018-02-15
|
| 1369718.1 |
MB/SC Failure on Sun Fire V240/V440 |
2017-04-05
|
| 1017586.1 |
Sun Fire V210/V240/Netra 240 Server: System Hangs After Completing POST |
2017-05-24
|
| 1011411.1 |
Sun Fire[TM] V210 Server wrongly populated different type of DIMM will not be recognized |
2017-05-24
|
| 1011104.1 |
Sun Fire[TM] V240: SCSI bus MESSAGE IN phase parity error |
2017-05-24
|
| 1010851.1 |
Sun Fire[TM] V210 keyboard stops working when entering Single User mode. |
2017-05-25
|
| 1010576.1 |
Unable to save ALOM password information to SCC on Sun Fire[TM] V210/V240 systems |
2017-05-24
|
| 1010567.1 |
Sun Fire[TM] V240 bge interface has high error rate at Cisco Catalyst WS-C4006 |
2018-05-09
|
| 1009190.1 |
Sun Fire[TM] V210/V240: Error message "Unknown or badly programmed LOM device" |
2017-05-25
|
| 1004867.1 |
Sun Storage 3310 Not Seen When Connected to LVD SCSI-3 HBA (Jasper) |
2016-06-30
|
| 1003852.1 |
NTI Unimux-USBV-24R KVM locks up after hours of inactivity. |
2012-07-31
|
| 1003659.1 |
How to address "VOLTAGE_SENSOR @ MB.BAT.V_BAT has exceeded low warning threshold." messages on the Sun Fire[TM] V210 and Sun Fire V240 servers |
2017-11-30
|
| 1002663.1 |
Sun[TM] Management Center, ELP Config Reader: "power-supply at PS1 - Lost Comms. (Unable to find child of type: NonNumericVoltageSensorTable)" |
2017-11-27
|
| 1002446.1 |
TTYMON process on v240 consumes excessive cpu time. |
2017-11-30
|
