| Problem Document
|
Synopsis
|
Last Modified Date
|
| 2189960.1 |
Firmware upgrade with existing faults from prior ILOM rev 3.2.6 to after results in misclassified Subsystem on T4-x, T5-x, & T7-x |
2018-01-12
|
| 2075211.1 |
Unable to start ilomconfig-interconnect Service: ILOM Not Reachable Over Internal LAN |
2018-03-06
|
| 2070764.1 |
300GB, 600GB, 900GB, and 1.2 TB Disk Firmware Upgrade to Address Unrecoverable Read Errors in SPARC Platforms. |
2017-07-17
|
| 2019500.1 |
System firmware upgrade via ILOM BUI fails with "Package Structure Is Corrupted" on T4 systems |
2017-10-08
|
| 1923776.1 |
Oracle Critical Thread (CT) Optimizations in SPARC Sun4v Based Servers to Enhance Single-Threaded Performance |
2017-12-04
|
| 1672818.1 |
Troubleshooting "Fatal error has occured in: PCIe fabric" panics on TX-X servers |
2017-10-04
|
| 1588217.1 |
ILOM: Status of Hard Drives Not Available on SPARC T3/T4/T5 Systems |
2017-12-13
|
| 1586616.1 |
Solaris 10 T4/T5 server with KU 147440-04 or later can hang or have performance issue with DISM |
2017-09-23
|
| 1580033.1 |
SP Resets on T5xx0, T3, T4, T5 and M5 Systems May Overwrite a User-Land Solaris Memory Page Causing In-Memory Corruption |
2018-01-22
|
| 1577361.1 |
Downgrading system firmware invalidates the TLI with FDD/FMA reporting the following faults [ fault.chassis.tli.invalid, ILOM-8000-30] |
2017-09-29
|
| 1571692.1 |
SPARC T4 system panic due to send_mondo timeout |
2017-08-16
|
| 1571110.1 |
SPARC T3/T4 Servers - PCIe Host Bus Adapter (HBA) Disappears During Reboot |
2015-07-27
|
| 1566851.1 |
USB faults seen on T3 or T4 platforms during boot of Operating System |
2017-08-16
|
| 1565509.1 |
T3/T4 Servers: Spurious Interrupt from USB on ino 0x1 / 0x2 / 0x4 |
2018-03-06
|
| 1565154.1 |
Access Loss To SP During Sysfw Upgrade |
2017-10-05
|
| 1539729.1 |
Error "set: Unable to configure network" when trying to configure/change ILOM network parameters |
2018-01-16
|
| 1530956.1 |
Bug 15971695 Sconfig Reset While Upgrading From ILOM 8.2.0.f To 8.2.1.b on T3 and T4 systems |
2017-10-05
|
| 1296521.1 |
Blade cannot be powered on after ILOM/BIOS upgrade, LSI firmware upgrade would fix this |
2018-05-15
|
