| Problem Document
|
Synopsis
|
Last Modified Date
|
| 1992379.1 |
TEMP_SENSOR At MB/CMP0/T_TCORE Has Exceeded High Warning Threshold (Sun Netra T2000) |
2017-07-12
|
| 1942692.1 |
Netra T2000 - IOBD/PCI-Bridge fail POST with PCIe link width warning despite firmware 6.3.x in place |
2017-04-06
|
| 1942508.1 |
T2000 - System won't boot with error message: ERROR: /pci@780: Improperly aligned address. function: b4 |
2017-05-01
|
| 1672473.1 |
Unable To Upgrade Firmware |
2017-04-06
|
| 1671439.1 |
Drive capacity reported by raidctl is incorrect, iostat output is still ok. |
2017-11-30
|
| 1590418.1 |
Sun Fire/Netra T2000 hard disk drive OK LED does not light. |
2017-10-05
|
| 1573681.1 |
Sun Fire T2000 Server: 00040078: "Host system poweron failed due to fault at MB/FF_POK" |
2018-05-17
|
| 1573070.1 |
T1000/T2000/T5xx0 - System shows ASR DB messages, slow to boot and shut down |
2017-05-01
|
| 1524340.1 |
73GB, 146GB, and 300GB Firmware Upgrade to Prevent Disk Drive Failures in SPARC platforms. |
2018-05-09
|
| 1516048.1 |
Sun Fire T1000/T2000, Sun Netra T2000 DIMMs with CEs (correctable errors) are being unnecessarily flagged by POST as faulty |
2018-03-07
|
| 1513742.1 |
snmp plugin picld Daemon reporting error : cannot get entPhysicalName |
2017-07-12
|
| 1011079.1 |
PSH: No Subscriber message on T1000/T2000 (FMD-8000-0W) |
2017-05-26
|
| 1009727.1 |
SC Reboot Hangs after Firmware Update on Sun Fire T1000/T2000 |
2018-01-16
|
