| Problem Document
|
Synopsis
|
Last Modified Date
|
| 2281806.1 |
Device ssd0 failed to power up. |
2017-09-18
|
| 2017748.1 |
How to Identify and Remove a Failed Internal Disk in Sun Fire V480, V490 Under MPxIO Control |
2017-11-27
|
| 1966319.1 |
Fatal PCI UE Error |
2017-04-05
|
| 1961470.1 |
Sun[TM] Remote System Control 2.2.3 rscadm command fails with 'fatal: relocation error:' |
2018-03-30
|
| 1935506.1 |
V480 Fan Not Working |
2017-04-05
|
| 1566936.1 |
Sun Fire V480, V490, V880, V880z and V890 Flash PROM device in this system cannot be reprogrammed |
2018-02-16
|
| 1523775.1 |
V880 Crashed due to a disk failure |
2018-02-16
|
| 1331699.1 |
V480 with Failed CPU/Memory board |
2018-02-15
|
| 1018924.1 |
Time of Day (TOD) drifts 2 or more seconds per day |
2013-02-20
|
| 1018914.1 |
Sun Fire[TM] V480/V490 server: USB failures seen after OBP is updated to 4.17.x |
2018-02-15
|
| 1018551.1 |
picld reports "ERROR running psvc_check_temperature_policy_0 on CPUx_DIE_TEMPERATURE_SENSOR" |
2017-03-01
|
| 1017494.1 |
Sun Fire[TM] V480 has no console output on power on |
2018-02-16
|
| 1012545.1 |
Fan tray failure prevents power up and error reporting on Sun Fire[TM] V480. |
2018-02-16
|
| 1011987.1 |
Error message - cannot load module 'pm', undefined symbol 'pm_enqueue_notify_others' |
2018-02-16
|
| 1011844.1 |
RAM-Copy CRC Error after Flash PROM Update |
2013-02-20
|
| 1011275.1 |
ERROR - gpio driver not installed / rscadm: Unable to reset RSC hardware |
2013-02-20
|
| 1009467.1 |
How to clear faults in FMA after component replacement on Sun Fire[TM] servers. |
2017-02-02
|
| 1009409.1 |
How to configure RSC modem port for dial-in. |
2018-02-15
|
| 1009167.1 |
Loss of RSC console input/output on Sun Fire[TM] V480/V880 post upgrading OBP to 4.15.x or setting service-mode? to true |
2018-02-16
|
| 1008719.1 |
Resolving Hard Hang Problems on Sun Ultra Servers |
2016-04-15
|
| 1007842.1 |
Sun Fire[TM] V480/V880: Fatal Reset diagnostic output is not captured by the RSC card |
2018-02-15
|
| 1007580.1 |
Sun Fire[TM] V880 or V480 firmware: Unable to Flashupdate: "ERROR: system security set: system firmware was not modified" |
2018-02-16
|
| 1006369.1 |
Sun Fire[TM] V480 dialin modem doesn't work. |
2018-02-16
|
| 1005995.1 |
USB keyboard not detected by Sun Fire[TM] V480. |
2018-02-15
|
| 1004610.1 |
Sun Fire [TM] V480 hangs while jumpstarting |
2018-02-15
|
| 1003852.1 |
NTI Unimux-USBV-24R KVM locks up after hours of inactivity. |
2012-07-31
|
| 1003648.1 |
Sun Fire[TM] V480 will not boot, DCDS(Dual Cheetah Data Switches) error on Scan Ring not populated |
2018-02-15
|
| 1003560.1 |
Solaris[TM]: What USB devices are supported on SPARC Workstations and Entry Level Servers |
2017-06-06
|
| 1002463.1 |
Sun Fire[TM] V480, V490, V880 and V890 system with RoHS RSC, part number 501-7314, emits "Unrecognized SC type, assuming 5016767" or give error "unable to find RSC serial device" while doing flashupgrade |
2018-02-15
|
| 1002179.1 |
The diag-out-console OBP setting |
2014-10-07
|
