| Asset ID: |
1-72-1935506.1 |
| Update Date: | 2017-04-05 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1935506.1
:
V480 Fan Not Working
| Related Items |
- Sun Fire V480 Server
- Sun Fire V880 Server
|
| Related Categories |
- PLA-Support>Sun Systems>SPARC>Workgroup Servers>SN-SPARC: SF-Vx80
|
In this Document
Created from <SR 3-9673564051>
Applies to:
Sun Fire V480 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire V880 Server - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Symptoms
Fan not working
Cause
This problem can be caused by issuing a (break, stop-A, ~#, etc..) prior to OBP finishing it's initialization. It is highly timing dependent, and not the most common cause of Fan issues.
You should not interrupt OBP from initializing. It must complete and reach the OK prompt.
Solution
Shutdown the server and remove all power for a few seconds, then start it again so the OBP process can complete. After that you can boot Solaris as usual.
Attachments
This solution has no attachment
