| FAB
|
Synopsis
|
Last Modified Date
|
| 1020157.1 |
"False Empty Cells" can be reported when running an audit on SL8500 code level 4.13. |
2012-11-20
|
| 1019957.1 |
On SL3000 and SL8500 Library turn off auto clean on the library (via SLConsole) if automated cleaning is turned on in ACSLS or HSC. |
2013-08-08
|
| 1019906.1 |
When upgrading to SL8500 4.13 from 3.9x level code or below, 3.98b must be used as bridge code. |
2012-11-16
|
| 1019657.1 |
FAB: Standard: Reactive: HBK and PUK ordering process for SL8500 and SL3000 (with firmware levels at 3.72 or higher) and SL3000 (all firmware levels). |
2017-10-24
|
| 1019606.1 |
Mandatory Code FRS_3.98b and Flash Memory changes for the SL8500. |
2014-12-30
|
| 1019537.1 |
Recommended NetBackup level for Sun StorageTek SL8500. |
2012-11-19
|
| 1019502.1 |
SL8500 CAP Assembly Gears will strip if a Reboot before Initialization is not done when replacing an original style CAP Assembly with a new style CAP |
2014-10-15
|
| 1019303.1 |
Sun StorageTek SL8500 Modular Library System Robot failure for 5010 on Reach. |
2012-11-20
|
| 1019217.1 |
FAB: Standard: Reactive: Reminder of Installation Parts Process for Sun StorageTek L8500/L3000. |
2017-05-15
|
| 1019186.1 |
The current level of SL8500 HandBots incorporate a new line scanner and require a minimum level of Library code. |
2013-09-10
|
| 1000961.1 |
Installation of IBM Gen 4 drives into SL8500 requires 3.77 microcode on the library and early drives were incorrectly mounted. |
2012-11-16
|
| 1000944.1 |
DWWN feature being added back into the Storage Tek 9x40 drive microcode at rev 1.36.x04 and Storage Tek T10000A code at 1.33.107. |
2012-11-16
|
