| FAB
|
Synopsis
|
Last Modified Date
|
| 1512680.1 |
FAB: Reactive: Seagate disk drive failures due to excessive idling at the same track after the drive updates its internal logs in System (non-user) tracks. |
2017-04-14
|
| 1019884.1 |
Controller replacement in Sun StorageTek 6140 and Sun StorageTek 6540 Arrays may initiate a Crystal firmware upgrade on the other controller. |
2017-05-30
|
| 1019709.1 |
FAB: Standard: Reactive: Firmware downgrades from 07.xx.xx.xx require special procedures and approval. |
2017-10-06
|
| 1019584.1 |
Misaligned spring connectors on CSM200 midplanes can cause HDD signal integrity issues for StorageTek 5320/5220 and 6140 Controller trays and CSM200 Expansion trays. |
2015-06-01
|
| 1019519.1 |
FCO A0288-1: Hardware: Sun StorageTek 6140 Family contains incorrect UL power supply label. |
2010-11-12
|
| 1019312.1 |
FAB: Standard: Reactive: Disk arrays running firmware versions 6.60 and 7.10 cannot send automated alerts through SDP to the Sun Storage TSC. |
2012-01-18
|
| 1019216.1 |
FAB: Standard: Reactive: Number of screw holes used for mounting CSM200 Drive Cage Midplane may not match the number of screw holes in the tray Chassis. |
2013-10-11
|
| 1001315.1 |
4GB Tyco Cables Can Be Damaged If Not Properly Removed |
2010-08-23
|
| 1000790.1 |
The Ethernet port on the StorageTek 25x0/61x0/6540 controllers may not work properly while attached to an Ethernet Switch port with auto-negotiation disabled. |
2015-12-07
|
| 1000284.1 |
FAB: Standard: Reactive: Clarification of the cables used for establishing a serial connection to the STK6140 and STK25x0 arrays. |
2015-03-02
|
