| FAB
|
Synopsis
|
Last Modified Date
|
| 1512680.1 |
FAB: Reactive: Seagate disk drive failures due to excessive idling at the same track after the drive updates its internal logs in System (non-user) tracks. |
2017-04-14
|
| 1017446.1 |
Sun StorEdge 3310/3510 Array may stop processing I/O when more than 2 hosts send SCCLI commands. |
2017-11-16
|
| 1017358.1 |
Sun StorEdge 3310/3510/3511 controllers must be allowed to complete the firmware cross loading process during controller replacement. |
2013-12-26
|
| 1001302.1 |
Important Sun Alert Documents Released For SE3310, SE3320, SE3510 And SE3511 Arrays. |
2018-02-28
|
| 1000882.1 |
Sun StorEdge 3310 Arrays with firmware prior to 4.13 and CLI software prior to 2.1, and SAF-TE firmware prior to 1170, may experience downtime, drives offline, and inaccurate status reporting for components. |
2017-10-06
|
| 1000862.1 |
SE3310/3510/3511 Arrays may experience a variety of issues if the SCSI I/O Timeout value is set too low |
2013-07-12
|
| 1000682.1 |
Array performance degradation as a result of the cache changing to write-through. |
2015-06-30
|
| 1000674.1 |
Sun StorEdge 3310 controller FRUs will not successfully upgrade from firmware version 3.66 to 4.13B in single controller configurations. |
2010-08-25
|
| 1000227.1 |
StorADE versions earlier than 2.4.39.005 may misrepresent errors for array components, possibly causing unnecessary replacement of hardware. |
2013-09-04
|
