| Problem Document
|
Synopsis
|
Last Modified Date
|
| 2003778.1 |
Sun SPARC Enterprise Server E3x00/E4x00/E5x00/E6x00 ( SunFire Classic ): Failed Peripheral Power Supply preventing server boot. |
2017-06-01
|
| 1523766.1 |
Sun SPARC Enterprise Server E3x00/E4x00/E5x00/E6x00 ( SunFire Classic ): "Overtemp detected on board " error during the POST. |
2017-10-18
|
| 1011862.1 |
Sun Enterprise[TM] 3x00 - 6x00 POST hangs solid during I/O board testing, SOC SRAM Test |
2017-03-29
|
| 1011677.1 |
Commands such as drvconfig can hang on fully populated servers : Can't open /dev/ksyms |
2017-03-29
|
| 1011235.1 |
Sun Enterprise[TM] 3x00, 4x00, 5x00, and 6x00 servers: POST may fail an IO board during FEPS testing |
2017-03-29
|
| 1008937.1 |
Error message "WARNING: tmp_putapage: err 5" can be ignored |
2017-03-29
|
| 1008719.1 |
Resolving Hard Hang Problems on Sun Ultra Servers |
2016-04-15
|
| 1007581.1 |
Disk board installed in Sun Enterprise[TM] E4x00/E5x00/E6x00 Server is not detected, seen or recognized with probe-scsi-all |
2017-03-29
|
| 1004444.1 |
Enterprise[TM] Classic (3500, 4500, 5550, or 6500): flash-update failure puts the system in a condition where it will not pass POST. |
2017-03-29
|
| 1003210.1 |
How to read prtdiag memory interleaving on Ultra servers |
2017-03-29
|
| 1001877.1 |
Sun Enterprise[TM] 3x00-6x00 servers show-post-results: slot 16 - Status=Fail, Type: Clock (Triger=) |
2017-03-29
|
