Eagle: SYSTOT-SFAPP Measurement Report Shows GTT Action def_sfapp But This Cannot Be Seen In Configuration

Asset ID:	1-71-2401030.1
Update Date:	2018-05-20
Keywords:

Solution Type Technical Instruction Sure

Solution 2401030.1 : Eagle: SYSTOT-SFAPP Measurement Report Shows GTT Action def_sfapp But This Cannot Be Seen In Configuration

Applies to:

Oracle Communications EAGLE (Software) - Version EAGLE 46.6 and later
Tekelec

Goal

SYSTOT-SFAPP Measurement report shows gtt (Global Title Translation) action def_sfapp but this cannot be seen in configuration

CLLI SWREL RPTDATE RPTIME TZ RPTTYPE RPTPD IVALDATE IVALSTART IVALEND NUMENTIDS
eagle EAGLE 46.6.0.0.0-73.16.0 3/5/2018 4:31:30 EST STP SYSTEM TOTAL MEASUREMENTS ON SFAPP LAST 3/5/2018 4:00:00 4:30:00 5

STATUS GTT ACTION SFAPPSUCC SFAPPFAIL SFAPPERROR1 SFAPPERROR2
K sfapp 4 1 0 0
K test 0 0 0 0
K test2 0 0 0 0
K sfapp1 0 0 0 0
K def_sfapp 0 0 0 0

> rtrv-gttact:act=sfapp

  eagle 18-03-05 06:42:14 EST EAGLE 46.6.0.0.0-73.16.0
  rtrv-gttact:act=sfapp
  Command entered at terminal #18.
;

Command Accepted - Processing
  eagle 18-03-05 06:42:14 EST EAGLE 46.6.0.0.0-73.16.0

  ACTID ACTION DEFACTID NDGT UIMREQD
  ----------------------------------------------------------------
  sfapp sfapp FALLBACK ALL on
  SCFADDR = 9999999999 FAILACTID = disc1
  HLRADDR = USECDPA
  test sfapp FALLBACK ALL off
  SCFADDR = 1234567879 FAILACTID = FALLBACK
  HLRADDR = TCAPPARM TT = 10
  test2 sfapp FALLBACK ALL on
  SCFADDR = 666 FAILACTID = disc1
  HLRADDR = USECDPA
  sfapp1 sfapp FALLBACK ALL off
  SCFADDR = 9999999999 FAILACTID = FALLBACK
  HLRADDR = TCAPPARM TT = 10

  GTT-ACT table is (7 of 2000) 1% full.

;
Command Executed

Solution

This is working as designed. The last entry is defined for default SFAPP GTT action which will be labelled as "def_sfapp" GTT action in the measurements table

Attachments

This solution has no attachment