AlarmMgr --alarmStatus vs ra.stat

Asset ID:	1-71-2399207.1
Update Date:	2018-05-15
Keywords:

Solution Type Technical Instruction Sure

Solution 2399207.1 : AlarmMgr --alarmStatus vs ra.stat

Applies to:

Oracle Communications Diameter Signaling Router (DSR) - Version DSR 7.0.1 and later
Information in this document applies to any platform.

Goal

Why does ra.stat show alarms but alarmMgr --alarmStatus does not

Solution

The command ra.stat shows application related alarms while alarmMgr shows platform related alarms.
At absence of an output when alarmMgr is used simply means that alarmMgr has no platform related alarms to report.

[admusr@kong-soam-b ~]$ ra.stat -w
+ iqt -z -fseverity,as=sev -fhits,as=ht,wid=2 -ftimeStamp,fmt=Time.M -feventNumb                er,as=event,wid=24,trunc,left -finstance,wid=12,left,over -ferrInfo,over,nonl Re                centAlarmEv.0 by severity,timeStamp
sev ht    timeStamp event                    instance        errInfo
*C 0 07:22:46.844 Route List Unavailable   routeListA   Condition may require attention if persists
*C 0 23:56:18.301 Peer Unavailable         PhantomPN    Condition may require attention if persists
*C 0 23:56:18.301 Peer Unavailable         MP2PeerNode Condition may require attention if persists
*C 0 23:56:18.302 Peer Unavailable         mp1          Condition may require attention if persists
** 0 23:56:14.068 Connection Unavailable   MP1MP2_2     DA-MP: (kong-mp-1) Condition may require attention if persists
[admusr@kong-soam-b ~]$
[admusr@kong-soam-b ~]$

[admusr@kong-soam-b ~]$ alarmMgr --alarmStatus
[admusr@kong-soam-b ~]$

References

<NOTE:1803576.1> - Translation Collaboration - Verbal Communication : GCSGCH, GCSSRM
<NOTE:1803593.1> - Converting a Regular English SR to Translation Collaboration : GCSGCH, GCSSRM

Attachments

This solution has no attachment