Sun StorageTek SL500 Modular Library System
 

PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL500 Library
 

In this Document

Goal

Solution

References

Created from <SR 3-17170093381>

Applies to:

Goal

Customer would like to check robot for obstructions but Library door will not open and the Service Required light is on.

Robotics park lever visible when facade is removed:

Solution

Instructions on how to open the library door Manually when there is a loss of power or the door just won't open due to Service Required issues with the SL500 Library.

Open the Front Door (With Power)
To open the front door when library power is on:
1. Press the Open Door button on the keypad.
    The software allows the current job to complete.
    The software retracts the robot into the robotic unit to prevent the robot from being damaged and to prepare it for servicing.
2. When the Open Door indicator turns on, use the key to open the door.

IF the door will not open you can attempt the following procedure to open library door.
Open the Front Door:
Remove the robotic facade from the top of the library by gently pulling the facade from side to side to pull the ball studs away from the clips. You might have to use a screwdriver to gently pry it off.

Warning – Possible injury to finger. Make sure that your finger is completely to the left in the next step. Otherwise it could be pinched when the door locking lever extends as shown in the picture.

While using one hand to move the robotics park lever to the left, use your other hand to unlock the door with the key.

This procedure can be used when there is no power to the library.
You can also power off the library by the switch on the back of the library moved to the OFF position.

To secure the front door when library power exists, push it closed and use the key to lock it.
OR.....remove the robotic facade from the top of the library by gently pulling the facade from side to side to pull the ball studs away from the clips. You might need to use a screwdriver to gently pry it off.

Caution – Possible component damage. Note the door locking lever protruding from the top of the door. Do not let it hit the robotics park lever when you close the door.

While using one hand to move the robotics park lever to the left, use your other hand to close the door. While still holding the door shut, release the robotics park lever.
Use the key to lock the door.
The robotics lever automatically moves to the right when the door locking lever retracts.


Refer to pages 361- 364 in the SL500 User's Guide.  https://docs.oracle.com/cd/E24292_01/index.html
 

References

This solution has no attachment