Eagle: Adding Or Deleting NTP Server In EPAP

Asset ID:	1-71-2381958.1
Update Date:	2018-04-04
Keywords:

Solution Type Technical Instruction Sure

Solution 2381958.1 : Eagle: Adding Or Deleting NTP Server In EPAP

Applies to:

Oracle Communications EAGLE (Software) - Version EPAP 16.0 and later
Tekelec

Goal

Replace the old NTP server with the new one with a different IP address

Procedure to do so and the impact

Solution

There is no impact on the provisioning or DB if you change the NTP servers.
For precautionary measures , it is advised to be done in low provisioning period.

===========================================================

Following is the procedure to delete and add the NTP server on the EPAP

1:> Login to the epapconfig menu

Type :> su - epapconfig

2:> Select Option 7 " Configure NTP Server"

/-------EPAP Configuration Menu--------\
/----------------------------------------\
| 1 | Display Configuration |
|----|-----------------------------------|
| 2 | Configure Network Interfaces Menu |
|----|-----------------------------------|
| 3 | Set Time Zone |
|----|-----------------------------------|
| 4 | Exchange Secure Shell Keys |
|----|-----------------------------------|
| 5 | Change Password |
|----|-----------------------------------|
| 6 | Platform Menu |
|----|-----------------------------------|
| 7 | Configure NTP Server |
|----|-----------------------------------|

3:> The Configure NTP Server Menu option 7 allows for the display, addition, and removal of an external NTP server.

/-----EPAP Configure NTP Server Menu-\
/--------------------------------------\
| 1 | Display External NTP Server |
|----|---------------------------------|
| 2 | Add External NTP Server |
|----|---------------------------------|
| 3 | Remove External NTP Server |
|----|---------------------------------|
| e | Exit |
\--------------------------------------/
Enter Choice:

4:> Display External NTP Server

The Display External NTP Server option 1 of the Configure NTP Server Menu displays External NTP
Server information. If a server is present, the server name and IP address are displayed.

............................................................
Example O/P :
........................
ntpserver1 1.1.1.1
Press return to continue...
............................................................

5:> Add External NTP Server

The Add External NTP Server option 2 of the Configure NTP Server Menu adds an External NTP
Server. The output below shows an example of the addition of an External NTP Server.

Note:
The IP address must be a valid address for an External NTP Server.

............................................................
Example O/P :
........................

Are you sure you wish to add new NTP Server? [N]: y Enter the EPAP NTP Server
IP Address: 1.1.1.1 External NTP Server [1.1.1.1] has been added.
Press return to continue...
............................................................

6: >Remove External NTP Server

The Remove External NTP Server option 3 of the Configure NTP Server Menu removes an External NTP Server.

If a server is present, selecting the Remove External NTP Server removes the server.
If an NTP Server is not present, the following appears.

............................................................
Example O/P :
........................
There are no External NTP Servers.
Press return to continue...
............................................................

7:> EPAP Configure NTP Server Menu Exit

The EPAP Configure NTP Server Menu Exit option e exits the EPAP Configure NTP Server Menu,and returns to the EPAP Configuration Menu.

============================
Refer the following for more info on the same.

https://docs.oracle.com/cd/E58911_01/doc.16/E54368_rev_2.pdf

Configure NTP Server Menu - Page 177

--------------------------------------

Attachments

This solution has no attachment