Eagle: When Implementing ENUM Feature, Is It Ok To Use Data=DN And Data=IMSI Instead Of Data=EPAP

Asset ID:	1-71-2379771.1
Update Date:	2018-03-28
Keywords:

Solution Type Technical Instruction Sure

Solution 2379771.1 : Eagle: When Implementing ENUM Feature, Is It Ok To Use Data=DN And Data=IMSI Instead Of Data=EPAP

Applies to:

Oracle Communications EAGLE (Software) - Version EAGLE 46.5 and later
Information in this document applies to any platform.

Goal

To provision ENUM card following command need to be entered with DATA=EPAP

ent-card:loc=<Card Location>:type=dsm:appl=enumhc:data=epap

Is It Ok to use Data=DN and Data=IMSI Instead of Data=EPAP as EPAP Data Split will be ON

ent-card:loc=<Card Location>:type=dsm:appl=enumhc:data=DN
ent-card:loc=<Card Location>:type=dsm:appl=enumhc:data=IMSI

Solution

If the EPAP Data Split feature is turned on or the Dual ExAP Config feature is enabled, and the value specified for the loc parameter indicates an E5-SM4G, E5-SM8G-B or SLIC card, then the data parameter must be specified. The data parameter can be specified only for an E5-SM4G, E5-SM8G-B or SLIC card running the VSCCP or SIPHC application on an IPSCP card.

The DATA parameter can only be equal to EPAP/ELAP when type=dsm and appl=siphc parameters are specified

For More Information, please refer to Eagle Customer documents at

Oracle® Communications EAGLE
Commands User's Guide
Release 46.5
E83005
Revision 1

https://docs.oracle.com/cd/E86948_01/docs.465/E83005_rev_1.pdf
Page 1242

Oracle® Communications EAGLE
ENUM User's Guide
Release 46.5
E86985
Revision 1

https://docs.oracle.com/cd/E86948_01/docs.465/E86985_rev_1.pdf
Page 61

Attachments

This solution has no attachment