Sun SPARC Enterprise M9000-32 Server
 
Sun SPARC Enterprise M5000 Server
 
Sun SPARC Enterprise M8000 Server
 
Sun SPARC Enterprise M3000 Server
 

PLA-Support>Sun Systems>SPARC>Enterprise>SN-SPARC: Mx000
 

In this Document

Goal

Solution

Applies to:

Goal

 There are situations when an XSCF snapshot is not available, collecting XSCF commands will help to hardware diagnostics.

Solution

version -c cmu -v                          // Version of OBP firmware
version -c xscf -v                          // Version XSCF firmware
version -c xcp                               // Version of the XSCF control pkg(XCP) firmware
showstatus                                   // Displays degraded/faulted FRUs
showhardconf -u                           // Displays the number of FRU installed in each Unit
showhardconf                               // Displays info about FRU installed in the System
ioxadm -v list                               // Displays external I/O Expansion Unit settings
ioxadm -v env                              // Displays list of all sensors for external IOX Units
showdualpowerfeed                      // Displays the current config dual power feed mode
showboards -v -a                         // Displays info on an extended system board (XSB)
showdcl -va                                 // Displays the current domain component list (DCL)
showfru -a sb                              // Displays the setting of all devices
showenvironment                         // Display the air temperature and humidity
showenvironment volt                   // Voltage information
showenvironment Fan                   // Fan rotation information.
showenvironment temp                 // Temperature information

showdomainstatus -a                    // Available domains
showcod -v                                  // Display Capacity on Demand(COD) config/info
showcodlicense -v                        // Display COD right-to-use.
showcodusage -v                         // Displays the current usage for COD resource
showdevices -d <Domain-ID>       // Display configured devices on XSBs
showlogs error -v                         // Displays the error log
showlogs event -v                        // Event logs
showlogs power                           // Power logs
showlogs env                               // Temperature and humidity record
showlogs monitor                         // Monitoring message log.
showlogs console -d <Domain-ID>// Console messages log
fmdump                                      // View fault management logs
fmdump -v                                  // Displays verbose event detail.
fmdump -V                                  // Displays very verbose details.
fmdump -e                                  // Error log insted of fault log.
fmdump -m                                 // Fault manager syslog message.
fmadm config                              // Config Fault Manager.

Reference manual: https://docs.oracle.com/cd/E19580-01/E21466-01/E21466-01.pdf

This solution has no attachment