Eagle R46.5 problem with rtrv-card command output when specifying parameter type loc

Asset ID:	1-71-2351830.1
Update Date:	2018-01-29
Keywords:

Solution Type Technical Instruction Sure

Solution 2351830.1 : Eagle R46.5 problem with rtrv-card command output when specifying parameter type loc

Applies to:

Oracle Communications EAGLE (Hardware) - Version EAGLE 46.5 to EAGLE 46.5 [Release EAGLE 46.0]
Information in this document applies to any platform.

Goal

Execute rtrv-card with parameter as card location results in "invalid hardware configuration for a specific card"

> rtrv-card:loc=1211

stp123 18-01-22 12:16:27 EEST EAGLE 46.5.0.0.1-70.39.1
rtrv-card:loc=1211
Command entered at terminal #19.
;

E2144 Cmd Rej: Location invalid for hardware configuration

However when executing "rtrv-card" command the particular card is showing in the list as valid and configured.

> rtrv-card

  stp123 18-01-22 12:18:57 EEST EAGLE 46.5.0.0.1-70.39.1
  rtrv-card
  Command entered at terminal #1.
;

Command Accepted - Processing
  stp123 18-01-22 12:18:57 EEST EAGLE 46.5.0.0.1-70.39.1
  CARD TYPE APPL DATA LSET NAME LINK SLC LSET NAME LINK SLC
  1101 DSM VSCCP
  1113 E5-MCAP OAM
  1114 TDM-A
  1115 E5-MCAP OAM
  1116 TDM-B
  1117 MDAL
  1201 DSM VSCCP
  1204 IPSM IPS
  1211 ENET IPSG

Solution

The problem with rtrv-card:loc=XXX output cleared after a MASP switch over.

Attachments

This solution has no attachment