How to reset entitlement for SBC

Asset ID:	1-71-2340396.1
Update Date:	2018-03-21
Keywords:

Solution Type Technical Instruction Sure

Solution 2340396.1 : How to reset entitlement for SBC

Applies to:

Acme Packet 6300 - Version S-Cz7.2.0 to S-Cz7.4.0 [Release S-Cz7.0]
Information in this document applies to any platform.

Goal

How to reset entitlement for SBC

Solution

Currently, the entitlements are set in the below SBC and the output is as follows:

SBC-6300-2# show entitlements
Provisioned Entitlements:
-------------------------
Session Border Controller Base : enabled
Session Capacity : 80000
Accounting : enabled
IPv4 - IPv6 Interworking : enabled
IWF (SIP-H323) : enabled
Load Balancing : enabled
Policy Server : enabled
Quality of Service : enabled
Routing : enabled
SIPREC Session Recording : enabled
IMS-AKA Endpoints : 0
IPSec Trunking Sessions : 0
MSRP B2BUA Sessions : 0
SRTP Sessions : 0
TSCF Tunnels : 0

Keyed (Licensed) Entitlements
-----------------------------
LI
Software TLS
SBC-6300-2#

Now if you want to reset the entitlements or start using the keyed license, then reset/remove the entitlements that are set by following the below procedure:

SBC-6300-2# control
Password: ---> (default: vxworks)

-> reset_entitlements
value = 1849261880 = 0x6e397f38
-> exit
Au revoir!
SBC-6300-2#

Now when you type 'show entitlements', it will ask you to set the product, which indicates that the entitlements are removed.

SBC-6300-2# show entitlements

Product not initialized; Please use 'setup product'

SBC-6300-2#

References

<NOTE:1673263.1> - How to Set Up the Hard Drive on an Acme Packet 4500 or 3800
<BUG:27165837> - SSD FORMATTING IN 6300 SBC IS FAILING
<BUG:26766692> - ACLI COMMAND ERRORS ON SRRTS

Attachments

This solution has no attachment