Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-2320355.1
Update Date:2017-11-21
Keywords:

Solution Type  Technical Instruction Sure

Solution  2320355.1 :   SL4000 - LED Light Strip (HBLW) Replacement  


Related Items
  • StorageTek SL4000 Modular Library System
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL4000 Library
  •  




In this Document
Goal
Solution


Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for service personnel

Applies to:

StorageTek SL4000 Modular Library System - Version All Versions and later
Information in this document applies to any platform.

Goal

 How to replace the LED Light Strip (HBLW)

Solution

DISPATCH INSTRUCTIONS
- WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED?: Familiar with the SL4000 Library.
- TIME ESTIMATE: 15 minutes
- TASK COMPLEXITY: 2

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:
- PROBLEM OVERVIEW: The LED Light Strip has been determined defective and requires replacement
- WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?: Take the library offline to the system.

Note: Refer to the SL4000 Install and Service Manual for additional details as needed.

LED Light Strip (HBLW) Replacement

Removal
1. Take the library offline, and then open the access door.
2. Locate the defective HBLW card on the ceiling of the module.
3. Disconnect the ribbon cables from each end of the card.
4. Pull out the pins from the anchors. Retain for reinstallation.
5. Hold the card with one hand. With the other hand, pull out the anchors. Retain the for reinstallation.
6. Remove the card.

Replacement
1. Align the card so that it matches the orientation of the other HBLW cards. Ensure the holes in the ceiling are visible through the card.

2. Hold the card with one hand. With the other hand, insert the anchors.
3. Insert the pins into the anchors.
4. Connect the ribbon cables on both ends of the card.

OBTAIN CUSTOMER ACCEPTANCE
- WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?: Verify the LED Light Assembly is functional and bring library online.

PARTS NOTE: Components List https://mosemp.us.oracle.com/handbook_internal/Systems/SL4000/components.html

REFERENCE INFORMATION: SL4000 Install and Service Manual: http://amomv0115.us.oracle.com/archive/cd_ns/E88746_01/index.html


Attachments
This solution has no attachment
  Copyright © 2018 Oracle, Inc.  All rights reserved.
 Feedback