| Asset ID: |
1-71-2320320.1 |
| Update Date: | 2017-11-21 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
2320320.1
:
SL4000 - How to Replace the Video Card (LOV)
| Related Items |
- StorageTek SL4000 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL4000 Library
|
In this Document
Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for service personnel
Applies to:
StorageTek SL4000 Modular Library System - Version All Versions and later
Information in this document applies to any platform.
Goal
Video Card (LOV) Replacement
Solution
DISPATCH INSTRUCTIONS
- WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED?: Familiar with the SL4000 Library.
- TIME ESTIMATE: 20 minutes
- TASK COMPLEXITY: 1
FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:
- PROBLEM OVERVIEW: The LOV Video Card has been determined defective and requires replacement
- WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?: This part can be hot swapped.
- WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE?:
Note: Refer to the SL4000 Install and Service Manual for additional details as needed.
Video Card (LOV) Replacement
Required Tools
■ ESD protection
Removal
You can hot-swap the video card. Removing this card makes the library degraded, but does not effect library operations.
1. Verify the video card is offline. In the GUI, go to Hardware. In the Device Status Tree, locate Video() in the base module and verify the Control State is "Offline". If it is online, right click the video card, go to Control State, and then click Go Offline.
2. Physically locate the video card (see "Base Card Cage Component Locations" onpage 4-11).
3. Pinch and pull the release levers. Remove the card (see "Removing a Quick Release Component" on page 4-9).
Replacement
1. Slide the new card into place and lock the release levers (see "Installing a Quick Release Component" on page 4-10).
2. Connect a monitor to the VGA port of the card. Push the SELECT button to toggle the display. If the display is currently at the front touch screen, the initial press will toggle it to the VGA port and subsequent presses will cycle through the controllers.
3. Confirm the video card is functioning.
OBTAIN CUSTOMER ACCEPTANCE
- WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?: Verify the LOV Video Card is functional to the library.
PARTS NOTE: Components List https://mosemp.us.oracle.com/handbook_internal/Systems/SL4000/components.html
REFERENCE INFORMATION: SL4000 Install and Service Manual: http://amomv0115.us.oracle.com/archive/cd_ns/E88746_01/index.html
Attachments
This solution has no attachment
