HP LTO5-7 - How to use HPE L&TT diagnostics tool via Ethernet mode.

Asset ID:	1-71-2308800.1
Update Date:	2017-09-19
Keywords:

Solution Type Technical Instruction Sure

Solution 2308800.1 : HP LTO5-7 - How to use HPE L&TT diagnostics tool via Ethernet mode.

Applies to:

HP LTO6 Tape Drive - Version All Versions and later
HP LTO5 Tape Drive - Version All Versions and later
Information in this document applies to any platform.

Goal

HPE LTO-5, LTO-6, and LTO-7 library tape drives support drive diagnostics via the Ethernet interface using the Internet Diagnostics Tool Interface (iDTI) protocol.

L&TT 4.14 and newer releases support this feature with the Ethernet mode.

With Ethernet mode,most diagnostics can be performed from a laptop (with L&TT installed) that is connected to the drive or library with an Ethernet cable.

This saves installing L&TT on a specific server and connecting to the drive or library with SCSI cables.

Solution

Steps :

1. Open HP L&TT (Run as Administrator)
2. Scan Mode - Hardware Scan
3. I/O Mode - Ethernet
4. Select "IP address" in drop-down box
5. Enter the drive IP address
6. Continue.

How to Collect Statistical and Error Logs from HP LTO Tape Drive Using HP LTT:ATR:1185771.1:1 (Doc ID 1185771.1)

Attachments

This solution has no attachment