SL3000 - How To Determine If There Is Power To The Op Panel

Asset ID:	1-71-2244756.1
Update Date:	2018-04-10
Keywords:

Solution Type Technical Instruction Sure

Solution 2244756.1 : SL3000 - How To Determine If There Is Power To The Op Panel

Related Items


Sun StorageTek SL3000 Modular Library System

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library

In this Document

Goal

Solution

References

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: added new KB
Created from <SR 3-14309563181>

Applies to:

Sun StorageTek SL3000 Modular Library System - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

How to determine if the SL3000 library has power to the Operators Panel

Solution

1. Open the back door to the SL3000 Base Module.

2. Loosen the 2 green thumbscrews to remove the Electronics Module Cover Plate.

3. Tilt the cover plate at the top and lift out of the tray.

4. You should now be able to see the SL3000 PUN LED's.

5. Verify that LED 14 ( CR2304 ) is lit. See picture below.

PUN LED's

6. Replace the op panel if the led is lit and the op panel does not power up.

7. Replace the PUN if the LED is not lit as no +48V is present.

SL3000 - How to Remove and Replace a PUN Card, ATR 2158641.1.2 (Doc ID 2158641.1)

Attachments

This solution has no attachment