SL500 - How To Reboot An SL500 Library

Asset ID:	1-71-2234862.1
Update Date:	2018-03-02
Keywords:

Solution Type Technical Instruction Sure

Solution 2234862.1 : SL500 - How To Reboot An SL500 Library

Applies to:

Sun StorageTek SL500 Modular Library System - Version All Versions to Not Applicable [Release All Releases to N/A]
Information in this document applies to any platform.

Goal

How to reboot the SL500 library

Solution

This task can be performed at any of the following:

•Standalone SL Console
•Web-launched SL Console

Use this procedure to reboot the library. This process involves reloading the firmware from flash memory and restarting the library controller.
Note – This feature is available starting with SL500 firmware version 1026 and SL Console version 2.40

1.Select Tools > Diagnostics.

2.Click the Library folder on the navigation tree.

The Library page appears.

3.Click Reboot in the upper right corner.

The Reboot confirmation message appears.

4.Click OK to continue.

If the library is online, the Offline confirmation message appears.

5.Click OK to take the library offline.

The Reboot confirmation message appears.

6.Click OK to continue.

The SL Console termination message appears.

7.Click OK to terminate this SL Console session.

You are logged off the SL Console. The library controller reboots the library. This could take several minutes.
Note – You cannot log back in to the SL Console until the library has fully initialized.

Procedure taken from the SL500 User Guide - E21059-04

Attachments

This solution has no attachment