SL8500 - Bulk CAP Command REQUIRED During Installation

Asset ID:	1-71-2228341.1
Update Date:	2018-04-05
Keywords:

Solution Type Technical Instruction Sure

Solution 2228341.1 : SL8500 - Bulk CAP Command REQUIRED During Installation

Related Items


Sun StorageTek SL8500 Modular Library System

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library

In this Document

Goal

Solution

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidentual for service personnel

Applies to:

Sun StorageTek SL8500 Modular Library System - Version All Versions and later
Information in this document applies to any platform.

Goal

Bulk CAP Command REQUIRED during install

Solution

When installing a BULK CAP on either a new SL8500 or as an upgrade, you must enter the command "config check" and reboot the controller, BEFORE allowing the robotics to boot.

Make sure this is done before closing the doors. Reboot the controller with the doors open.

This instruction is in the upgrade Conversion Bill and the SL8500 Installation Manual for Bulk CAP Libraries document.

Attachments

This solution has no attachment