| Asset ID: |
1-71-2197923.1 |
| Update Date: | 2017-11-14 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
2197923.1
:
SL8500 - Amendment to 8.51 Upgrade Procedures
| Related Items |
- Sun StorageTek SL8500 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
|
In this Document
Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for Service Personnel
Applies to:
Sun StorageTek SL8500 Modular Library System - Version All Versions and later
Information in this document applies to any platform.
Goal
Amendment to 8.51 Upgrade Procedures
Solution
Upgrade to FRS_8.51.
After upgrade (from a remote SLC session, not the Op Panel):
Standalone library:
Using SLC go to the Select Active Cells screen.
Press the "Apply Default Capacity" button.
Verify:
SLC -> Library -> General Properties will also show Active Cell count reflects the expected capacity of the library.
SLC -> Library -> General Status screen shows that the Access State is online.
If not, "Bring Online" via the "-select-transition" to bring the library online.
Complex:
Login to CLI with the service id and password.
Execute the CLI command: partition setNonPartitionedHLI
Verify on all of the libraries in the complex:
SLC -> Library -> General Properties will also show Active Cell count reflects the expected capacity of the library.
SLC -> Library -> General Status screen shows that the Access State is online.
If not, "Bring Online" via the "-select-transition" to bring the library online.
Attachments
This solution has no attachment
