![]() | Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||||||
Solution Type Technical Instruction Sure Solution 2163124.1 : Will the /opt/exalytics/bin/exalytics_flashovsrepos.sh -script Work on an Exalytics X5-4, OVM 3.3.3 Server
In this Document
Created from <SR 3-13023498637> Applies to:Exalytics In-Memory Machine X5-4 - Version All Versions and laterOracle Exalytics Software - Version 2.0.0.0.0 and later Information in this document applies to any platform. GoalWill the /opt/exalytics/bin/exalytics_flashovsrepos.sh -script work on an Exalytics X5-4 server? If not, what are the steps to check or configure flash in OVS on X5-4? SolutionPer internal, unpublished <Bug 22618897>, EXALYTICS R2: NEED TO PRESENT THE FLASH CARDS TO OVM TO ASSIGN TO EXALYTICS, you cannot use the exalytics_flashovsrepos.sh on an X5-4 (or X6-4) server. The command is not compatible with the nvme flash cards which are shipped with X5-4 and X6-4 servers. If you run the script, you will likely see an error like: Instead, when using an Exalytics X5-4 server with OVM 3.3.3, you must follow the steps in the Exalytics Installation Guide, under Section 3.7.3. Additionally, related internal, unpublished bugs: <Bug 21918984> and <Bug 22247490> state that <Patch 22546910> and the readme steps, are also required. References<BUG:21918984> - EXALYTICS X5-4 REQUIRES A SUPPORTED VIRTUAL IMAGE FOR INSTALLATIONS<BUG:21855641> - FLASH DRIVES NOT SEEN ON X5-4 DOM0 EVEN AFTER APPLYING THE PATCH 21258871 <BUG:22247490> - CANNOT MAP THE FLASH DRIVES <BUG:22618897> - EXALYTICS R2: NEED TO PRESENT THE FLASH CARDS TO OVM TO ASSIGN TO EXALYTICS <NOTE:2163123.1> - Exalytics: Cannot See Flash Disk with "ddcli" Command after Installing OVM 3.3.3 on an X5-4 Server Attachments This solution has no attachment |
||||||||||||||||
|