How to Change the SSN Value for the messages going thru the Backup Route ?

Asset ID:	1-71-2161336.1
Update Date:	2016-07-20
Keywords:

Solution Type Technical Instruction Sure

Solution 2161336.1 : How to Change the SSN Value for the messages going thru the Backup Route ?

Applies to:

Oracle Communications EAGLE (Software) - Version EAGLE 3x.x and later
Information in this document applies to any platform.

Goal

Is it is possible to add a 2nd route toward the MSS platform as a backup route, so that the SubSystem Number (SSN) value of the outgoing messages are being changed by Eagle to the value 129 ?
This is a request from the MSS vendor in order to identify the Message Signal Unit (MSUs) coming from the backup route.

Solution

The "true" request is not to add a second backup route with a higher RC, but to change the SSN=7 to SSN=129 for the traffic which would go thru this backup route.
Eagle does not get any criteria allowing it to decide to change the SSN value.
The fact that the primary route becomes prohibited and then the traffic is routed thru the secondary route is not a triggering criteria for the Eagle to modify the SSN for the outgoing MSUs.

Attachments

This solution has no attachment