| Asset ID: |
1-71-2148276.1 |
| Update Date: | 2017-08-16 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
2148276.1
:
9840/T10000 - How to Connect to a Drive Using VOP
| Related Items |
- Sun StorageTek 9840 Tape Drive
- Sun StorageTek T10000 Tape Drive
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK T-Series Drive
|
In this Document
Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for Service Personnel
Applies to:
Sun StorageTek T10000 Tape Drive - Version All Versions and later
Sun StorageTek 9840 Tape Drive - Version Not Applicable and later
Information in this document applies to any platform.
VOP Virtual Op Panel
Goal
9840/T10000 - How to Connect to a Drive Using VOP
Solution
Connect To The Drive Using VOP
Establish a network connection to the tape drive.
If you are on location with the drive connect an Ethernet cable between your laptop and the drive. Set up your laptop for an IP address that is on the same subnet as your drive. (example: 10.0.0.1 for the drive and 10.0.0.2 for the laptop)
If you are remote then VPN in to the corporate network and verify that you can access the drive by pinging it. (open a Command Prompt window and type: ping ip_address)
Open the Standalone VOP application.
Windows
Go to Start > All Programs > Multi Drive VOP CSE > T10000 9840D VOP
Solaris
Linux
In the Authentication Dialog window enter an IP address of the tape drive and click Connect or select Cancel to open the application.
Connect to the drive. Select File > Connect To Drive and enter the IP address of the drive.
Attachments
This solution has no attachment
