SL8500/SL3000: How To Display The Drive Check code

Asset ID:	1-71-2126486.1
Update Date:	2017-10-03
Keywords:

Solution Type Technical Instruction Sure

Solution 2126486.1 : SL8500/SL3000: How To Display The Drive Check code

Related Items


Sun StorageTek 9840 Tape Drive
 Sun Storage SL8500 Modular Library System
 Sun Storage SL3000 Modular Library System
 Sun StorageTek T10000 Tape Drive
 Sun StorageTek 9940 Tape Drive

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK T-Series Drive

In this Document

Goal

Solution

Applies to:

Sun StorageTek 9840 Tape Drive - Version Not Applicable and later
Sun StorageTek T10000 Tape Drive - Version All Versions and later
Sun Storage SL8500 Modular Library System - Version Not Applicable and later
Sun Storage SL3000 Modular Library System - Version Not Applicable and later
Sun StorageTek 9940 Tape Drive - Version Not Applicable and later
Information in this document applies to any platform.

Goal

Describe the process needed to display the drive Operator Panel message.

Solution

Connect SLC to the library.

Under the Drives heading select the drive you need to view.

Click on the drive to select it.

Click on the Display Tab.

Look at the Drive Display Data line to see the current message on the display. If it begins with CK xxxx, where xxxx is a 4 digit Fault Symptom Code (FSC), then the drive is failing bring up diagnostics. You can look up the description of the FSC using VOP.

SLC Display

Attachments

This solution has no attachment