| Asset ID: |
1-71-2089680.1 |
| Update Date: | 2017-11-21 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
2089680.1
:
SL150 - How to Reset a Drive from the SL150 Modular Library Web GUI
| Related Items |
- StorageTek SL150 Modular Tape Library
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL150 Library
|
In this Document
Applies to:
StorageTek SL150 Modular Tape Library - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Goal
This document assists with how to reset a drive from the SL150 Modular Library Web GUI
Solution
Estimated Time: 15 minutes
To reset a drive from the Web GUI on the SL150 please follow the steps below:
- Access the SL150 Web GUI by entering the IP address or host name into a Web Browser.
- Log into the SL150 Web GUI with an admin user.
- Once you are logged into the Web GUI click on "Drives" tab on the main menu to the left hand side of the main SL150 library page.
- Once you are at the drives page click on the drive that you need to reset.
- Then click on the "Actions" button above the drives listing and a drop down will appear.
- From the drop down click on the "Restart Drive" option.
- A dialogue window will pop up asking you to verify that you do want to reset the drive. If it is the bridge drive a note will be listed stating that resetting the bridge drive will cause you to lose access to the library from the host.
- Verify again that it is the drive that you want to reset and click on "OK" from the dialogue window.
- The drive will then reset or restart and you can see in the activity monitor at the top of the Web GUI page when the reset or restart is complete.
Attachments
This solution has no attachment
