Sun Server X3-2
 

PLA-Support>Sun Systems>DISK>ZFS Storage>SN-DK: ZS
 

In this Document

Goal

Solution

References

Applies to:

Goal

A procedure to reset the password on a ZS3-ES is based on the Sun Server X3-2 motherboard

Before You Begin

    * You must be physically present at the server to perform this procedure.
    * You can use the preconfigured default user account to recover a lost password or to re-create the root user account in combination with the physical presence button.

Solution

Recover Root Account Password

If necessary, system administrators can recover the preconfigured Oracle ILOM local root account or the password for the local root account by using the preconfigured Oracle ILOM default password.

To recover the root account password you need a local serial management port (SER MGT) connection to Oracle ILOM.
In addition, if the Physical Presence State is enabled (the default) in Oracle ILOM, you must prove that you are physically present at the server.

To recover the root account password, perform these steps:  Oracle Integrated Lights Out Manager (ILOM) 3.0 - page 26



  1.  Establish a local serial management connection to Oracle ILOM and log in to Oracle ILOM using the default user account.

    For example:  SUNSP-000000000  login: default

    Press and release the physical presence button

    Press return when this is completed...



  2.  Prove physical presence at the server.

    To prove physical presence at the server, press the Locator button on the front of the server.

    For the exact location of the Locator button, see  Front Panel With Four 3.5-inch Drives Configuration  or  Front Panel With Eight 2.5-inch Drives Configuration.

    Note: the Oracle ZFS Storage ZS3-ES front panel is a 2.5 inch eight drive configuration



  3.  Return to your serial console and press Enter.

    You will be prompted for a password.



  4.  Type the password for the default user account: defaultpassword.



  5.  Reset the account password or re-create the root account.



For more information, refer to the section on "Configuring Local User Accounts" in the Oracle Integrated Lights Out Manager (ILOM) 3.1 Configuration and Maintenance Guide at  http://www.oracle.com/pls/topic/lookup?ctx=ilom31

Check for relevancy - 10-May-2018

References

This solution has no attachment