Oracle MICROS Workstation 5A with 4 GB CompactFlash card and Microsoft WinCE 6.0
 
Oracle MICROS PC Workstation 2015,INTEL CORE i5
 
Oracle MICROS User Workstation 5, WEPOS
 
Oracle MICROS Workstation 5A with Microsoft WinCE
 
Oracle MICROS Workstation 5A, Oracle MICROSoft windows
 
Oracle MICROS PC Workstation 2015 with Intel(R) Core(R) i5 2-core 2.4 GHz processor, 4 GB RAM, 128 GB SSD, and Microsoft Windows Embedded POSReady 7
 
Oracle MICROS PC Workstation 2015, Celeron
 
Oracle MICROS Workstation 5A DC, MICROSOFT WINDOWS 7 PRO, 2G RAM, SATA SSD
 
Oracle MICROS Workstation 5
 
Oracle MICROS Workstation 5A with 2 GB DDR2-667 RAM, SATA SSD and Microsoft Windows Embedded POSReady 2009
 
Oracle MICROS PC Workstation 2015 with Intel(R) Celeron(R) P4505 2-core 1.8 GHz processor, 2 GB RAM, 160 GB 2.5-inch SATA-II HDD, and Microsoft Windows Embedded POSReady 2009
 
Oracle MICROS PC Workstation 2015 with Intel(R) Celeron(R) P4505 2-core 1.8 GHz processor, 2 GB RAM, 160 GB 2.5-inches SATA-II HDD, and Microsoft Windows 7
 
Oracle MICROS PC Workstation 2015 with Intel(R) Core(R) i5 2-core 2.4 GHz processor, 2 GB RAM, 160 GB 2.5-inches SATA-II HDD, and Microsoft Windows Embedded POSReady 7
 
Oracle MICROS Workstation 4
 
Oracle MICROS Workstation 4LX
 
Oracle MICROS PC Workstation 2015 with Intel(R) Core(R) i5 2-core 2.4 GHz processor, 2 GB RAM, 160 GB 2.5-inches SATA-II HDD, and Microsoft Windows 7
 
Oracle MICROS Workstation 5, WEPOS
 

PLA-Support>MICROS Hardware>MICROS HW>MICROS HW ALL>MICROS Hardware: CAP VCAP
 

In this Document

Goal

Solution

References

Applies to:

Goal

 How to Remove and Replace the Compact Flash Card on the MICROS Workstation 4/4LX, 5/5A, or 2015.

Solution

 DISPATCH INSTRUCTIONS
   WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED?: Ability to follow documented process.
   TIME ESTIMATE: 5 minutes
   TASK COMPLEXITY: 0

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:
   PROBLEM OVERVIEW: Remove and replace the Compact Flash Card on the MICROS Workstation 4/4LX, 5/5A, or 2015.

   WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?: Always power off the workstation before removing the Compact Flash (CF) Card.

   WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE?:

Removing the CF Card:

Once the workstation is powered off, catch the CF card lip using a thumbnail or fingernail and remove it from the socket.

Installing the CF Card:

1. Use an L-wrench to open the 2 screws that are holding the cover in place.

2. Facing the IO Panel, install the card with the label showing and the arrow in the upper left corner.

3. Push the card into the socket using very little force until only a few millimeters are visible.

OBTAIN CUSTOMER ACCEPTANCE
   WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:

Ensure that workstation powers on and starts. 'CF NOT FOUND POST' error is caused by CF Card not being properly installed or disabled.

Run the Client Application Loader (CAL) on the workstation. See <Document 2039918.1> How to Run the Client Application Loader (CAL).

PARTS NOTE:

700504-111

REFERENCE INFORMATION:

Refer to the MICROS Workstation 5 and MICROS Workstation 5a product manuals for additional information.

This solution has no attachment