Stop Provisioning In Lsmspri During startNode On Secondary

Asset ID:	1-71-2036179.1
Update Date:	2017-06-19
Keywords:

Solution Type Technical Instruction Sure

Solution 2036179.1 : Stop Provisioning In Lsmspri During startNode On Secondary

Applies to:

Oracle Communications EAGLE (Hardware) - Version LSMS 13.1 and later
Information in this document applies to any platform.

Goal

If Lsmspri is being provisioned during startNode on secondary, this document explains how to stop that.

Solution

The lsmssec was not synching with lsmspri after startNode. Every time, it will complain for unable to upgrade an entry in a table. The problem was found that, while the snapshot was made in the lsmspri, there were delta data coming in the lsmspri e.g. an update on X, then an delete on X. In the snapshot that will be taken after that, the entry X will be missing; however, when the update command will come to secondary, it will fail. So it was advised to stop provisioning when doing startNode on lsmspri. That cleared the issue and upgrade of secondary was successful.

KEY WORDS: stat Node, StartNode, synch, snapshot

Attachments

This solution has no attachment