Sun SPARC Enterprise T5440 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to remove and replace a T5440 DVD

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED
No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes

Task Complexity: 0

REMOVAL/REPLACEMENT INSTRUCTIONS

PROBLEM OVERVIEW:
Replace DVD

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
Full verified backups of all data and operating systems potentially affected by service activities
The system needs to be shut down and powered off with power cables disconnected.

WHAT ACTIONS ARE REQUIRED:

Remove the DVD-ROM Drive

Before you begin, complete these tasks:

■ Power off the server
■ “Extend the Server to the Maintenance Position”
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures”
■ “Remove the Top Cover”
■ “Remove the Front Bezel”

Do the following:
1. Remove the flex cable retainer. Loosen the captive No. 2 Phillips screw and lift the retainer up and out of the chassis.
2. Unplug the DVD-ROM drive from the flex cable assembly.
3. Push the DVD-ROM drive forward until it protrudes from the front of the chassis.
4. Slide the DVD-ROM drive out of the chassis.

Install the DVD-ROM Drive

1. Slide the DVD-ROM drive into its bay.
2. Connect the DVD-ROM drive to the flex cable assembly.
3. Install the flex cable retainer. Place the retainer into position and tighten the captive No. 2 Phillips screw.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Verify DVD drive functionality

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/SE_T5440/components.html#RemovableMedia

REFERENCE INFORMATION:

Sun Enterprise T5440 Server Service Manual

http://docs.oracle.com/cd/E19488-01/E22634-01/E22634-01.pdf

This solution has no attachment