SL8500 - How to Enable SNMP on SL8500 Port 2A on FRS

Asset ID:	1-71-1963796.1
Update Date:	2017-09-26
Keywords:

Solution Type Technical Instruction Sure

Solution 1963796.1 : SL8500 - How to Enable SNMP on SL8500 Port 2A on FRS_7.70 and Above

Applies to:

Sun StorageTek SL8500 Modular Library System - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

How to enable SNMP on SL8500 port 2A.

Solution

SL8500 code version should be 7.70 or above.

FRS_7.70 SNMP enhancements
Allow enable or disable of SNMP over external port 2A (eth5).

SL8500> snmp enable port2a

requestId

requestId 34101

Device 1,0,0,0,1

Success true

Done

Failure Count 0

Success Count 1

NOTE: If the following error is reported trying to enable snmp on 2A:

Number 3301
Text Failure from device - resultCode: 4001 - resultText: Feature not implemented returned from snmp enable/disable request

Check Firmware is at FRS 7.70 or above.

References

<NOTE:1631502.1> - SL8500/SL3000 - How to Obtain the Management Information Base / MIB Using SL Console

Attachments

This solution has no attachment