IPTPS Peak Value Abnormal After Health Check (HC) 2 Activity

Asset ID:	1-71-1931055.1
Update Date:	2017-02-15
Keywords:

Solution Type Technical Instruction Sure

Solution 1931055.1 : IPTPS Peak Value Abnormal After Health Check (HC) 2 Activity

Applies to:

Oracle Communications EAGLE (Software) - Version EAGLE 44.x and later
Tekelec

Goal

MAXSLKTPS value shows too high during HC2 for some linksets.
For example:
  IP TPS USAGE REPORT

  THRESH CONFIG/ CONFIG/ TPS PEAK PEAKTIMESTAMP
  RSVD MAX
  --------------------------------------------------------------------------
  LSN
  mshtb 80% 4000* 26000 TX: 2310 2897 14-09-27 19:07:36
  RCV: 2330 286331153 14-09-23 06:00:06
  --------------------------------------------------------------------------
  LOC LINK
  1201 A 80% 500* 5000 TX: 294 370 14-09-27 19:07:36
  RCV: 287 355 14-09-27 19:07:36
  1203 B 80% 500* 5000 TX: 306 4294901760 00-00-00 00:00:00
  RCV: 288 366 14-09-27 19:07:36
  1301 A 80% 500* 5000 TX: 267 16776960 00-00-00 00:00:00
  RCV: 286 361 14-09-27 19:07:36

Solution

This is related to PR 221429

REPT-STAT-IPTPS reports a wrong (higher) total MAXTPS for the IPSG linkset if following 2 conditions are true
1) more than 1 links of a IPSG linkset configured on a single ENET-A card
2) the multiple of MAXSLKTPS configured for the IPSG linkset and the number of its links of the on a single ENET-A card is more than 5000

Resolution has been tested in Eagle: 45.0.0-64.50.0

From the commands shared; I take example of mshtb:

> rept-stat-iptps:lsn=mshtb

  stpabc 14-09-29 14:07:01 EST EAGLE5 44.0.4-64.34.24
  rept-stat-iptps:lsn=mshtb
  Command entered at terminal #17.
;

Command Accepted - Processing
  stpabc 14-09-29 14:07:01 EST EAGLE5 44.0.4-64.34.24
  IP TPS USAGE REPORT

  THRESH CONFIG/ CONFIG/ TPS PEAK PEAKTIMESTAMP
  RSVD MAX
  --------------------------------------------------------------------------
  LSN
  mshtb 80% 4000* 26000 TX: 2310 2897 14-09-27 19:07:36
  RCV: 2330 286331153 14-09-23 06:00:06
  --------------------------------------------------------------------------
  LOC LINK
  1201 A 80% 500* 5000 TX: 294 370 14-09-27 19:07:36
  RCV: 287 355 14-09-27 19:07:36
  1203 B 80% 500* 5000 TX: 306 4294901760 00-00-00 00:00:00
  RCV: 288 366 14-09-27 19:07:36
  1301 A 80% 500* 5000 TX: 267 16776960 00-00-00 00:00:00
  RCV: 286 361 14-09-27 19:07:36
  1303 B 80% 500* 5000 TX: 273 352 14-09-27 19:07:36
  RCV: 290 362 14-09-27 19:07:36
  1201 B 80% 500* 5000 TX: 303 374 14-09-27 19:07:36
  RCV: 297 364 14-09-27 19:07:36
  1203 A1 80% 500* 5000 TX: 309 375 14-09-27 19:07:36
  RCV: 294 361 14-09-27 19:07:36
  1301 B 80% 500* 5000 TX: 277 353 14-09-27 19:07:36
  RCV: 298 360 14-09-27 19:07:36
  1303 A1 80% 500* 5000 TX: 279 341 14-09-27 19:07:36
  RCV: 285 357 14-09-27 19:07:36
  --------------------------------------------------------------------------

  Command Completed.
;
Command Executed

> rtrv-bip:loc=1203

  stpabc 14-09-29 14:11:41 EST EAGLE5 44.0.4-64.34.24
  rtrv-bip:loc=1203
  Command entered at terminal #17.
;

Command Accepted - Processing
  stpabc 14-09-29 14:11:41 EST EAGLE5 44.0.4-64.34.24
  --------------------------------------------------------------------------
  Location: 1203 - MBD

  Part Number: 870-2212-05
  Revision: H Week/Year: 44/2010
  Serial Number: 10210447###

  Software Match ID: EG - 001 Max Power Rating : 646mA
  --------------------------------------------------------------------------
  END OF REPORT
;
Command Executed

The linkset has more than one link on card 1203. Which is E5ENT-A card.
Hence the PR is being hit.

Please contact Support for more details on the PR

Attachments

This solution has no attachment