L1400 - Router is Not Seeing the Robot

Asset ID:	1-71-1920388.1
Update Date:	2017-05-22
Keywords:

Solution Type Technical Instruction Sure

Solution 1920388.1 : L1400 - Router is Not Seeing the Robot

Applies to:

Sun StorageTek L1400 Tape Library - Version All Versions and later
Information in this document applies to any platform.

Goal

To provide default settings on the L1400 Interface Router to enable the hand to be mapped to a lun to be presented to the host.

Solution

These are the needed settings to be added to the Router:

FIber Port 0

Link Status Link UP

Port Mode Auto Sense

Use Hard AL_PA Disabled

Discovery Mode Discovery on Link UP

Buffered Tape Writes Enabled

Buffered Tape Queue Depth 1

Default Map Indexed

Performance Mode 2GB

Force FCP Response Code Disabled

Mapping This setting must be enabled

FC PORT 0 FC LUN 0 Lun 0 CHGR UP STK700 0318 (serial number shown as customer specific)

If the above lun is mapped and saved, after the reboot of the router and a IPL of the library this will be active for the customer to use.

References

<NOTE:1364929.1> - How to Collect Statistical and Error Logs From L180/ L700e, L1400 Library:ATR:1364929.1:2
<NOTE:1016817.1> - L180/L700 - Resetting Password in L-Series Library Administrator
<NOTE:1301273.1> - How To Remove and Replace a Hand Camera Assembly from the L180/700/1400:ATR:965:2
<NOTE:1006640.1> - How To Get Explorer To Collect ALOM Data on V125/V210/V215/V240/V245/V440/V445 and Netra 210/240
<NOTE:1676882.1> - Policy - HOW TO upload files/logs/data to the Oracle SFTP Server

Attachments

This solution has no attachment