| Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback |
| Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition | ||
|
|
||
 |
||||||||||||||
Solution Type Technical Instruction Sure Solution 1913603.1 : T10000 - How To Reset The IP Address To The Factory Default
In this Document
Applies to:StorageTek T10000D Tape Drive - Version All Versions to All Versions [Release All Releases]Sun StorageTek T10000B Tape Drive - Version All Versions to All Versions [Release All Releases] Sun StorageTek T10000A Tape Drive - Version All Versions to All Versions [Release All Releases] StorageTek T10000C Tape Drive - Version All Versions to All Versions [Release All Releases] Information in this document applies to any platform. GoalDetail the process to Reset The IP Address To The Factory Default. The default IP address is 10.0.0.1. Solution1. Ensure the drive is not being used for anything that needs the current IP address. (encryption, SDP) 2. Find the Maintenance Switch on the back of the drive itself or on drive tray. 3. Quickly press and release this switch. Note - if the switch is pressed too long it will force a drive dump. 4. The drive IP is now set for the factory default of 10.0.01. 5. You can now connect to the drive using a machine that has the VOP application installed.
This is shown on page 24 and 25 of the T10000 Service Manual http://download-adc.oracle.com/archive/cd_ns/E26546_03/index.html Attachments This solution has no attachment |
||||||||||||||
|
||||||||||||||