How to Remove and Replace Sun Blade 1000/2000 Battery:ATR:1679577.1:1

Asset ID:	1-71-1679577.1
Update Date:	2017-11-30
Keywords:

Solution Type Technical Instruction Sure

Solution 1679577.1 : How to Remove and Replace Sun Blade 1000/2000 Battery:ATR:1679577.1:1

Applies to:

Sun Blade 2000 Workstation - Version Not Applicable and later
Sun Blade 1000 Workstation - Version Not Applicable and later
Information in this document applies to any platform.

Goal

Sun Blade 1000, Sun Blade 2000, How to Remove and Replace Battery

**********************************************************************
To report errors or request improvements on this procedure,
please Add a comment on Doc ID: 1487890.1
**********************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED:
Sun Blade 1000/Sun Blade 2000 product training is desirable but not required

TASK COMPLEXITY: 1

TIME ESTIMATE: 45 minutes

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS

PROBLEM OVERVIEW: Battery failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE:

The workstation contains a replaceable lithium battery. Lithium batteries may explode if mishandled. Do not dispose of the battery in fire. Do not disassemble it or attempt to recharge it.

Removing the Battery

1. Power off the workstation, remove the access panel, and attach the antistatic wrist strap.

Caution – Use proper ESD grounding techniques when handling components. Wear an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.

2. Lay the workstation on its side.

3. Locate the battery on the motherboard.

4. Remove the cover for the CPU shroud.

5. Remove the graphics card.

6. Carefully lift the battery retaining clip with a small screwdriver.

7. Carefully slide the battery out of its socket and remove it from the workstation.

Replacing the Battery

Note – Install the new battery with the plus (+) side up.

1. Hold the battery retaining clip up and slide the battery into its socket.

2. Install the graphics card.

3. Install the CPU shroud cover.

4. Detach the antistatic wrist strap, replace the access panel, and power on the workstation.

5. Reset the time of day and date.
If necessary, at the system prompt type: date [-u] mmddHHMM[[cc]yy][.SS]

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE FE/ADMINISTRATOR NEED TO TAKE TO RETURN the SYSTEM TO AN OPERATIONAL STATE:

Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE: Include Battery location:

https://mosemp.us.oracle.com/handbook_internal/Systems/SunBlade1000/components.html

https://mosemp.us.oracle.com/handbook_internal/Systems/SunBlade2000/components.html

REFERENCES:

Please refer to the

Sun Blade 1000 and Sun Blade 2000 Service Manual http://docs.oracle.com/cd/E19127-01/blade2000.ws/816-3217-10/816-3217-10.pdf

Attachments

This solution has no attachment