Sun SPARC Enterprise M8000 Server
 
Sun SPARC Enterprise M4000 Server
 
Sun SPARC Enterprise M3000 Server
 
Sun SPARC Enterprise M9000-32 Server
 
Sun SPARC Enterprise M5000 Server
 
Sun SPARC Enterprise M9000-64 Server
 

PLA-Support>Sun Systems>SPARC>Enterprise>SN-SPARC: Mx000
 

The SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide covers only setup for email notifications via the command line
This Document describes how to achieve it via the WEB Based GUI

In this Document

Goal

Solution

Created from <SR 3-8792075531>

Applies to:

Goal

How to setup email reporting for XSCF errors via GUI
 

Solution

the official steps are only described for for the commandline in:
 SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide
see chapters
 2.2.12 Mail Administration
 6 XSCF Mail Function

this are the steps to set it up via the GUI:

1) login into the WEB XSCF Console (XSCF BUI)
NOTE: you must have  "platadm" privileges to do the following which is by default set for user platadm

1. select under Settings-->smtp
do the correct setup ( the values are customer dependent) for your email environment
[the “E-mail Reply Address” is the address which is then shown in the from field when the XSCF sends an email])
click "Save"

2. select under settings-->email reporting
click on: Emailreport State: -x- Enabled
click "Save"

3. enter your email address
select add
click "Save"

4. click "Test Mail" send a test mail for checking if it is correct

It has the following format (this is just an example):
------- Original Message --------
Subject: Test Mail:M3000: M3000: serial# 0836AK2136
Date: Wed, 02 Apr 2014 08:39:39 +0100
From:<email Reply Address>@<domainname>.<top-level-domain>
To: <your email Address>@<domainname>.<top-level-domain>


Host Name: m3000-tvp540-b-xscf
Send Timestamp: 04-02-2014 08:39:38 BST
Mail Server: 141.146.126.238
 

This solution has no attachment