| Asset ID: |
1-71-1662089.1 |
| Update Date: | 2017-05-22 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1662089.1
:
T10000D - How to Change Large File Accelerator Settings On T10000D Tape Drives using VOP
| Related Items |
- StorageTek T10000D Tape Drive
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
|
In this Document
Created from <SR 3-8719471994>
Applies to:
StorageTek T10000D Tape Drive - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Goal
How to change the LFA ( Large File Accelerator) settings of the T10000D drive using VOP (Virtual Op Panel) to persist through an IPL.
Solution
This settings should persist through an IPL. The only way they would not persist is if you changed the interface type. (FICON to Fibre Channel or vice versa) Then the settings would be lost.
Below steps to be used to change the settings via VOP 2.1.1
1. set the drive to FICON or FC and press commit. The drive will IPL.
To do this => Take the drive offline and select the Configuration menu item. Select Drive Data, Select the FIBRE tab. At the bottom are 2 selections: one for FIBRE and the other for FICON.
2. Set the LFA to the value you want.
3. Commit this setting. The drive will IPL.
4. Verify the setting is correct.
5. IPL the drive again and verify that the setting is still the same.
Attachments
This solution has no attachment
