StorageTek SL150 Modular Tape Library
 

PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL150 Library
 

Details on add and modifying userids and passwords.

In this Document

Goal

Solution

References

Created from <SR 3-8716504461>

Applies to:

Goal

 This doc covers procedures on how to administer userids and passwords using the SL150 GUI.

Solution

Adding a User and Assigning a Role
To add a user account, proceed as follows:
1.Select Settings from the menu on the left side of the interface. A set of tabbed property sheets appears.
2.Select the Users tab.
3.Click the Add User icon in the menu bar at the top of the tab.
4.When the Add User dialog appears, enter a User ID in the first text field provided. User IDs must be unique.
For example, the user's email address makes a good user ID.
5.In the next text field, enter the Password for the account.
6.Re-enter the password in the Verify Password text field.
7.Select the desired role for the user from the choices listed in the Assigned Role control: Administrator, Operator, Viewer, and Service.
8.Press the OK button to commit your changes and dismiss the dialog, or press the Cancel button to discard the changes.

Removing a User
To remove a user account from the system, proceed as follows:
1.Log in under the Administrator role.
Only administrators can change passwords.
2.Select Settings from the menu on the left side of the interface. A set of tabbed property sheets appears.
3.Select the Users tab.
4.Select the account by clicking on the corresponding table row.
5.Click the Delete User icon in the menu bar above the table to open the Delete User dialog.
6.Press the OK button to commit your changes and dismiss the dialog, or press the Cancel button to discard the changes.

To change a user's assigned role
1.Select Settings from the menu on the left side of the interface. A set of tabbed property sheets appears.
2.Select the Users tab.
3.Select the account by clicking on the corresponding table row.
4.Click the Change Role icon in the menu bar at the top of the tab.
5.When the Change User Role dialog appears, select the desired role from the choices listed in the Assigned Role control: Administrator, Operator, Viewer, and Service.
6.To commit your changes, press the OK button in the Change User Role dialog.
7.To discard your changes, press the Cancel button in the Change User Role dialog.

Changing Your Own Password (Operator)
Operators can change their own passwords. Proceed as follows.
1.Select Settings from the menu on the left side of the interface. A set of tabbed property sheets appears.
2.Select the Users tab.
3.Select Change Password.
4.When the Change User Password dialog appears, enter the Old Password.
5.In the Change User Password dialog, enter the desired New Password.
6.In the Verify Password field of the Change User Password dialog, re-enter the new password.
7.Press OK to save your changes or Cancel to retain the old password.

Changing Your Own or Another User’s Password (Administrator)
If you are an administrator, change your own or another user’s password using the following procedure:
1.Select Settings from the menu on the left side of the interface. A set of tabbed property sheets appears.
2.Select the Users tab.
3.Select the user account by clicking on the corresponding table row.
4.Click the Change Password icon in the menu bar at the top of the tab.
5.When the Change Password dialog appears, enter the new password in the Password field. Passwords must contain a minimum of eight characters, at least one of which is a numeral.
6.In the Change Password dialog, re-enter the new password in the Verify Password text field.
7.To commit your changes, press the OK button in the Change User Role dialog.
8.To discard your changes, press the Cancel button in the Change User Role dialog.

Please refer to the User Guide section 5-2 User Administration for full details.

References

This solution has no attachment