How To Verify Firmware on Adaptec Controller SGXPCIESAS-R-INT-Z

Asset ID:	1-71-1633729.1
Update Date:	2016-06-02
Keywords:

Solution Type Technical Instruction Sure

Solution 1633729.1 : How To Verify Firmware on Adaptec Controller SGXPCIESAS-R-INT-Z

Related Items


Sun Fire X4140 Server
 Sun Fire X4170 Server
 Sun Fire X4250 Server
 Sun Fire X4150 Server
 Sun Fire X4270 Server
 Sun Fire X4275 Server
 Sun Fire X4440 Server
 Sun Fire X4240 Server

Related Categories


PLA-Support>Sun Systems>x86>Server>SN-x64: SERVER 32bit

In this Document

Goal

Solution

Syntax

Description

Lists information about the controllers, logical drives, and physical devices. This information can include (but is not limited to) the following items:

Examples

Applies to:

Sun Fire X4270 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire X4140 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire X4170 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire X4250 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire X4150 Server - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

How to verify firmware on SCSI controller Adaptec - arcconf STK RAID Manager

Controller SGXPCIESAS-R-INT-Z

Solution

Verify first if the arcconf is installed on you System .

If is not installed please go to http://docs.oracle.com/cd/E19121-01/sf.x4150/820-1177-13/index.html and go to Installation procedure for your type of OS .

After installation type the next command :

Syntax

arcconf config controller-number [ad | ld | pd | al]

Description

Lists information about the controllers, logical drives, and physical devices. This information can include (but is not limited to) the following items:

Controller type

BIOS, boot block, device driver, and firmware versions

Logical drive status, RAID level, and size

Physical device type, device ID, presence of PFA

Physical device state

Enclosure information: fan, power supply, and temperature status

Examples

arcconf getconfig 1

Attachments

This solution has no attachment