SL8500 / SL3000 - How to Determine When Physical Audit is Complete

Asset ID:	1-71-1629733.1
Update Date:	2017-05-19
Keywords:

Solution Type Technical Instruction Sure

Solution 1629733.1 : SL8500 / SL3000 - How to Determine When Physical Audit is Complete

Applies to:

Sun StorageTek Tape Library Hardware - Version All Versions to All Versions [Release All Releases]
Sun StorageTek SL8500 Modular Library System - Version All Versions and later
Sun StorageTek SL3000 Modular Library System - Version All Versions and later
Information in this document applies to any platform.

Library Audit Notification

Goal

To confirm library physical audit completed.

Solution

Using SLConsole.

Log into the designated library.

Open a "monitor all" session (goto Tools > Monitors > Permanent Monitors > All).

Select "Open" button.

Monitor for "AuditDaemon" messages.... see below:

2014-02-22T15:40:26.576 1,1,0,2,0 root default AuditDaemon -106 trace 3952 From device Data=<response sequence="819133" final="false"><command>audit</command><result identifier="1"><resultStatus><resultSeverity>info</resultSeverity><resultCode>0000</resultCode><resultText><!|CDATA|End of Text||></resultText><operationalState>000</operationalState></resultStatus><addressStatus>empty</addressStatus><address>1,1,-18,2,50</address><label><!|CDATA|||></label></result></response>

2014-02-22T15:40:26.605 1,1,0,2,0 root default AuditDaemon -106 trace 3952 From device Data=<response sequence="819133" final="false"><command>audit</command><result identifier="1"><resultStatus><resultSeverity>info</resultSeverity><resultCode>0000</resultCode><resultText><!|CDATA|End of Text||></resultText><operationalState>000</operationalState></resultStatus><addressStatus>empty</addressStatus><address>1,1,-18,2,51</address><label><!|CDATA|||></label></result></response>

2014-02-22T15:40:26.634 1,1,0,2,0 root default AuditDaemon -106 trace 3952 From device Data=<response sequence="819133" final="true"><command>audit</command><result identifier="1"><resultStatus><resultSeverity>info</resultSeverity><resultCode>0000</resultCode><resultText><!|CDATA|End of Text||></resultText><operationalState>000</operationalState></resultStatus><addressStatus>empty</addressStatus><address>1,1,-18,2,52</address><label><!|CDATA|||></label></result></response>

When messages stops, physical audit is complete. No "Audit Completed" message will be displayed.

Note: Since audit may take some time, best to capture log to a file (In Monitor session, select Spool File > Start Spooling).

Attachments

This solution has no attachment