| Asset ID: |
1-71-1575307.1 |
| Update Date: | 2017-05-30 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1575307.1
:
SL8500 - How to Run a Non-Disruptive Robot Self Test During Production
| Related Items |
- Sun StorageTek SL8500 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
|
How to run a robot self test
In this Document
Applies to:
Sun StorageTek SL8500 Modular Library System - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Goal
To verify the performance of a robot in an SL8500 in a non-disruptive manner during normal production.
Solution
Perform a Robot Self-Test
This task can be performed at any of the following:
•Local operator panel
•Standalone SL Console
•Web-launched SL Console
Perform a self test on a robot.
Note – To perform a robot self-test, diagnostic cartridges must be available in the library.
Task Steps
1. Select Tools > Diagnostics.
2. Expand the Robot Folder, and click the robot you want to test.
3. Click the Self Test tab.
4. In the Mode list, select Non-Disruptive.
5. Click the Run button in the upper right corner.
Status messages display as the self-test runs. After the test finishes, the system displays a message indicating the diagnostic test is complete.
References
E20869 SL8500 User's Guide
Attachments
This solution has no attachment
