How to set the iLOM date and time from the iLOM CLI (Command Line Interface) console

Asset ID:	1-71-1559054.1
Update Date:	2017-07-02
Keywords:

Solution Type Technical Instruction Sure

Solution 1559054.1 : How to set the iLOM date and time from the iLOM CLI (Command Line Interface) console

Applies to:

Sun Fire X4100 M2 Server - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Goal

How to set the iLOM date and time from the iLOM CLI (Command Line Interface) console

Solution

Set the iLOM date using the following command:

-> set /SP/clock datetime=MMDDhhmmYYYY.ss

(Change MMDDhhmmYYYY.ss with current date & time ).

If an NTP server is enabled, disable the server first then update the date and time using this command.

You can disable NTP server synchronisation by running following command, which disables the NTP service:

-> set /SP/clock/usentpserver=disabled

Once the NTP service is disabled you can set the ILOM date and time.

Attachments

This solution has no attachment