StorageTek SL150 Modular Tape Library
 

PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL150 Library
 

In this Document

Goal

Fix

Applies to:

Goal

SL150 - How To Set Up Cartridge Label Character Options

Selecting a Volume Label Format for an Unpartitioned Library

Translating Between Physical and Logical Labels

Fix

Information is taken from Library Configuration in a Service Bundle:

Library Info

Library Modules:
1. Kilauea base unit

Mailslot status: Closed
Bridged Drive: 1
Total Cell Count: 30
Total Cap Cell Count: 4
Partition Count: 0
Partitioning: false
Fastload: false
Reserved Cell Count: 0
Scan Audit Disabled: false
Motion Retries: 8
Motion Failures: 11

Host Labeling: Trim last two characters <------------------------------------------------- This is set from: Settings/Partitions/Edit
Local Op Panel Labeling: Trim last two characters <------------------------------------ This is set from: Settings/Library/Edit The Option is changed in the "Drop Down" of the "Volume Label Format". 

Oracle recommends the Local Op Panel labeling be set for "Full Label".  This will allow the Service Bundle to show the complete volser label including the LTO media type.

This one shows the "Edit" button that you would click on for the OP Panel label settings:

This one shows the options you get after clicking on the "Edit" button and then the drop down for the OP Panel label settings:

This one shows you the "Edit" button that you would click on for the Host label settings:

This one shows the options you get after clicking on the "Edit" button and then the drop down for the Host label settings:

Refer to Chapter 3 of the User's Guide for further information:
http://docs.oracle.com/cd/E35103_06/en/E24606/E24606_06.pdf

StorageTek SL150 Modular Tape Library
User’s Guide
Revision 6
E24606-06

Translating Between Physical and Logical Labels
This information is found in Appendix A of the User's Guide.

This solution has no attachment